M18 Fuel 2738-20 - Polisher MILWAUKEE - Free user manual and instructions
Find the device manual for free M18 Fuel 2738-20 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless polisher |
| Brand | Milwaukee |
| Model | M18 Fuel 2738-20 |
| Power supply voltage | 18 V (Milwaukee M18 battery) |
| Motor type | POWERSTATE brushless motor |
| No-load speed | 700 to 3000 rpm (variable) |
| Backing pad diameter | 125 mm (5 inches) |
| Spindle thread | M14 |
| Weight (with battery) | Approximately 1.8 kg |
| REDLINK PLUS electronics | Protection against overload, overheating and deep discharge |
| REDLITHIUM-ION technology | Battery compatible with the M18 range |
| Recommended use | Polishing, buffing and applying wax on bodywork and painted surfaces |
| Maintenance | Clean the ventilation slots and pad regularly with a soft, dry cloth |
| Safety | Wear protective gloves and goggles, do not use in explosive atmospheres |
| Spare parts | Pad, nuts, battery and charger available from authorized Milwaukee dealers |
| Repairability | Durable design, repairable by an approved after-sales service |
| Warranty | 2-year limited warranty (according to manufacturer's conditions) |
Frequently Asked Questions - M18 Fuel 2738-20 MILWAUKEE
Which battery should I use with the M18 Fuel 2738-20 polisher?
The Milwaukee M18 Fuel 2738-20 polisher is compatible with all batteries in the M18 REDLITHIUM-ION range of 18 V. For optimal runtime, choose a high-capacity battery (for example 5.0 Ah or more).
How do I adjust the rotation speed?
The speed is adjustable via the knob located on the tool body. Turn the knob to vary the speed between 700 and 3000 rpm. Always start at low speed to avoid polishing marks, then increase gradually.
What accessory is supplied with the 2738-20 model?
This tool is usually sold as bare (without battery or charger). It is supplied with a 125 mm backing pad and a locking nut. Polishing accessories (bonnets, pads) must be purchased separately.
Can I use this polisher on surfaces other than bodywork?
Yes, it is suitable for polishing painted surfaces, metal, rigid plastic and even fiberglass. Adapt the polishing bonnet and speed according to the material.
How do I clean the polisher after use?
Use a soft, dry cloth to wipe the housing and pad. Avoid water and solvents. Clean the ventilation slots regularly to prevent dust build-up.
What should I do if the polisher heats up abnormally?
Stop the tool immediately and remove the battery. Let it cool down. Check that the ventilation slots are not blocked. If the problem persists, contact an authorized Milwaukee after-sales service.
Is the polisher suitable for beginners?
Yes, thanks to the variable speed setting. Beginners can use a low speed (around 1000-1500 rpm) to learn to control the tool before moving on to higher speeds.
What is the lifespan of the brushless motor?
The POWERSTATE brushless motor is designed to last longer than a brushed motor. It does not require any brush replacement and offers better energy efficiency.
How do I replace the backing pad?
Unscrew the central nut using a wrench (usually a pin wrench). Remove the old pad, place the new one and tighten the nut firmly. Make sure the pad is properly centered before reinstalling the battery.
Can I use this polisher with an extension cord or an adapter?
No, this tool works exclusively with Milwaukee M18 batteries. Never use a mains adapter, as this would damage the device and pose a safety risk.
User questions about M18 Fuel 2738-20 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual M18 Fuel 2738-20 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M18 Fuel 2738-20 by MILWAUKEE.
USER MANUAL M18 Fuel 2738-20 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : M18 Fuel 2738-20
Category : Polisher