M18 2851-20 - Screwdriver MILWAUKEE - Free user manual and instructions
Find the device manual for free M18 2851-20 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless impact driver |
| Brand | Milwaukee |
| Model | M18 2851-20 |
| Nominal voltage | 18 V |
| Battery type | M18 Lithium-ion |
| No-load speed | 0 to 2,900 RPM |
| Maximum tightening torque | 181 Nm |
| Tool holder | 1/4" hex (6.35 mm) |
| Screwdriving capacity | Screws up to 14 mm |
| Length | 112 mm |
| Weight (without battery) | 1.1 kg |
| Motor technology | M18 FUEL brushless |
| Variable speed | Yes, electronic |
| Rotation direction | Reversible (left/right) |
| Lighting | Integrated LED |
| Spindle lock | Yes |
| Motor brake | Yes |
| Maintenance | Clean with a dry cloth |
| Safety | Spindle brake and overload protection |
| Spare parts | Battery, charger, and bits available |
| Manufacturer's warranty | 5 years |
Frequently Asked Questions - M18 2851-20 MILWAUKEE
How to install the battery on the M18 2851-20 impact driver?
Slide the M18 battery into the compartment at the base of the handle until it clicks into place. Press the release button to remove it.
Which battery should I use with the M18 2851-20 model?
Use exclusively Milwaukee M18 batteries (18 V). M18 RedLithium batteries are recommended for optimal performance.
How to reverse the direction of rotation?
Use the switch located above the trigger. Push it left for clockwise rotation (driving), right for counterclockwise rotation (removing).
How to adjust the speed of the driver?
The speed varies proportionally with the pressure applied to the trigger. Light pressure gives a slow speed, full pressure gives maximum speed.
How to use the integrated LED light?
The LED turns on automatically as soon as the trigger is pressed. It illuminates the work area. No adjustment is necessary.
What regular maintenance is required?
Clean the tool with a dry cloth after each use. Check the tightness of screws and bits. Never use solvents.
What safety precautions should be followed?
Wear safety glasses and gloves. Never work on live electrical circuits. Use the tool only with compatible batteries. Hold the tool with both hands.
Can standard bits be used with the tool holder?
Yes, the 1/4" (6.35 mm) hexagonal tool holder accepts all standard hex-shank bits. Insert the bit fully until it clicks into place.
How to store the driver when not in use?
Remove the battery to prevent any accidental start. Store the tool in a dry, clean place, away from frost and moisture.
What to do if the tool does not start?
Check that the battery is charged and properly inserted. If the problem persists, check the condition of the brushes (if brushed motor, but here brushless) and contact an authorized Milwaukee service center.
User questions about M18 2851-20 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual M18 2851-20 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M18 2851-20 by MILWAUKEE.
USER MANUAL M18 2851-20 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : M18 2851-20
Category : Screwdriver