BEEPGE 120 - Air Conditioning BEKO - Free user manual and instructions
Find the device manual for free BEEPGE 120 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Beko |
| Model | BEEPGE 120 |
| Cooling Capacity | 12000 BTU/h (3.5 kW) |
| Airflow Rate | 300 m³/h |
| Fan Speeds | 3 speeds (Low, Medium, High) |
| Remote Control | Yes, included with batteries |
| Timer Function | 24-hour programmable timer |
| Refrigerant Type | R32 |
| Power Supply | 220 - 240 V, 50 Hz |
| Rated Power Input | 1150 W (cooling) |
| Noise Level | 65 dB (max) |
| Dimensions (W x H x D) | 450 x 730 x 380 mm |
| Weight | 35 kg |
| Air Filter | Washable dust filter |
| Water Tank Capacity | 1.5 L (auto evaporation system) |
| Installation | Free-standing, exhaust hose included |
| Safety Features | Overheat protection, auto restart |
| Maintenance | Removable filter, easy access panel |
| Spare Parts & Repairability | Available via Beko service centers, repairability index 8.1 |
| Energy Efficiency Class | A (cooling) |
| General Features | Quiet operation, eco mode, sleep mode |
Frequently Asked Questions - BEEPGE 120 BEKO
How do I install the Beko BEEPGE 120 air conditioner?
Place the unit on a flat floor near a window. Attach the exhaust hose to the unit and extend it through an open window or vent kit. Ensure the hose is not bent sharply. Plug the unit into a grounded electrical outlet. Select the desired mode with the remote control or control panel.
How often should I clean the air filter?
Clean the air filter every two weeks for optimal performance. Turn off the unit, remove the filter grille, take out the filter, and gently wash it with water and mild detergent. Let it air dry completely before reinstalling.
What does the error code E1 mean?
The E1 error code indicates a malfunction related to the temperature sensor. This may be due to a faulty sensor or a wiring issue. Turn off the unit, unplug it, and wait 10 minutes before restarting. If the error persists, contact Beko support.
How can I drain the water from the unit?
The BEEPGE 120 has an auto evaporation system that evaporates most condensate. In high humidity, the water tank may fill up. When the tank is full, the unit will automatically stop. Remove the drain plug at the back, place a low container under the drain hose, and let the water flow out. Replace the plug securely.
Does this unit have a heating function?
No, the Beko BEEPGE 120 is a cooling-only air conditioner. It does not provide heating. It is designed for cooling, dehumidifying, and fan modes.
Can I use the air conditioner with a window kit?
Yes, the unit is compatible with a window venting kit. The exhaust hose can be attached to the adjustable window slider included in the package. This allows you to seal the window gap and improve cooling efficiency.
How do I reset the remote control?
If the remote control is not working, remove the batteries and press any button for 5 seconds to discharge any residual power. Insert fresh AAA batteries (usually 2) and try again. Ensure the receiver on the air conditioner is not obstructed.
What is the recommended room size for this AC?
With a cooling capacity of 12000 BTU/h, the BEEPGE 120 is suitable for rooms up to 25-30 square meters (roughly 270-320 square feet). Keep doors and windows closed for best performance.
How do I switch between cooling and fan modes?
Press the 'Mode' button on the remote control or control panel. Each press cycles through Cooling, Fan, and Dehumidifying modes. The selected mode icon will appear on the display. In Fan mode, you can adjust the fan speed.
What type of refrigerant does it use?
The Beko BEEPGE 120 uses R32 refrigerant, which is more environmentally friendly than older refrigerants. R32 has a lower ozone depletion potential and higher energy efficiency.
User questions about BEEPGE 120 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual BEEPGE 120 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BEEPGE 120 by BEKO.
USER MANUAL BEEPGE 120 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BEEPGE 120
Category : Air Conditioning