MST254 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free MST254 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Table saw |
| Brand | Scheppach |
| Model | MST254 |
| Motor power | 2000 W |
| Supply voltage | 230 V / 50 Hz |
| Blade diameter | 254 mm |
| No-load speed | 4500 rpm |
| Maximum cutting height at 90° | 90 mm |
| Maximum cutting height at 45° | 68 mm |
| Table dimensions | 530 x 355 mm |
| Overall dimensions | 620 x 620 x 350 mm |
| Net weight | 15 kg |
| Cutting type | Rip, crosscut, miter |
| Blade tilt | 0 - 45° |
| Extraction system | Chip vacuum connection |
| Safety equipment | Safety switch, protective guard, push stick |
| Maintenance and cleaning | Regular cleaning of the table, guard and suction duct |
| Spare parts | Available from Scheppach customer service |
| Recommended use | Domestic DIY and light woodworking |
Frequently Asked Questions - MST254 SCHEPPACH
How to change the saw blade?
First disconnect the machine from the mains. Use a wrench to loosen the central nut, then remove the flange and the blade. Install the new blade respecting the indicated rotation direction. Tighten the nut and check that the blade turns freely.
How to adjust the cutting height?
Turn the height adjustment crank to raise or lower the blade. The maximum height at 90° is 90 mm. Then lock the safety handle to prevent any change during cutting.
How to use the parallel guide?
Attach the parallel guide to the table by sliding it into the grooves. Align it to the desired distance from the blade and tighten the knobs. Use the push stick for narrow pieces to keep your hands away.
How to clean the machine?
Always unplug the saw before cleaning. Vacuum the sawdust from the table, the guard, and the suction duct. Wipe the surfaces with a slightly damp cloth and dry them. Do not use aggressive products.
What is the motor power?
The motor of the Scheppach MST254 saw develops a power of 2000 W. This power is suitable for clean cuts in soft and hard woods up to 90 mm thick.
What safety precautions should be taken?
Always wear safety glasses and do not wear loose clothing. Use the protective guard, the guide, and the push stick. Wait for the blade to come to a complete stop before accessing the cutting area.
How to connect a vacuum cleaner?
The saw is equipped with a 35 mm chip evacuation connection. Attach the hose of a workshop vacuum cleaner to it to directly suck up the sawdust during cutting. This improves safety and visibility.
The saw does not start, what to do?
First check that the plug is plugged in and that the power cable is not damaged. Also check the condition of the fuse or circuit breaker. If the problem persists, consult the manual or contact customer service.
Can you cut wet wood?
The saw can cut wet wood, but this reduces the quality of the cut and accelerates blade wear. It is better to use dry wood to obtain clean results and avoid kickback.
How to adjust the cutting angle?
Loosen the tilt adjustment handle located at the front of the machine. Tilt the blade from 0° to 45° using the graduated scale. Tighten the handle firmly before making the cut.
User questions about MST254 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual MST254 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MST254 by SCHEPPACH.
USER MANUAL MST254 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : MST254
Category : Saw