PoolProfessional heatUP 1400 - Heat pump Steinbach - Free user manual and instructions
Find the device manual for free PoolProfessional heatUP 1400 Steinbach in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Device type | Heat pump for swimming pools |
| Brand | Steinbach |
| Model | PoolProfessional heatUP 1400 |
| Heating output | approx. 14 kW |
| Recommended pool size | up to approx. 35 m³ |
| Power supply | 400 V / 50 Hz |
| Power consumption | approx. 2.8 kW |
| Water temperature range | 10 °C to 35 °C |
| Connection diameter | 50 mm |
| Heat exchanger | Titanium heat exchanger |
| Refrigerant | R32 |
| Sound power level | approx. 58 dB(A) |
| Dimensions (L × W × H) | approx. 900 × 350 × 550 mm |
| Weight | approx. 55 kg |
| Control | Digital control panel with LCD display |
| Safety functions | Frost protection, overheat protection, flow switch |
| Protection class | IPX4 |
| Installation | Outdoors on a level surface |
| Maintenance | Clean the fin filter, check the condensate drain |
| Spare parts supply | Available for fan, condenser and electronics |
Frequently Asked Questions - PoolProfessional heatUP 1400 Steinbach
How do I connect the heat pump to the pool?
Connect the heat pump to the 50 mm hoses of the filter system. The connections are located on the front. Pay attention to the correct flow direction and secure all clamps with hose clamps.
What power supply does the device require?
The heat pump requires a 400 V power supply with 50 Hz. Only a professionally installed supply line with a suitable circuit breaker ensures safe operation.
How do I set the desired water temperature?
Press the SET button on the control panel and select the desired temperature with the arrow keys. Save the value with OK. The display permanently shows the current water temperature.
What do the error codes on the display mean?
Typical codes: E1 – flow too low, E3 – mains voltage too low, E5 – frost protection active. For E1, check the pump and filter; for E5, wait for a higher outside temperature.
How do I care for and clean the heat pump?
Clean the condenser fins with a soft brush or water, remove leaves and dust. Regularly check the condensate drain for blockages.
Can the heat pump be installed in the rain?
Yes, the housing is splash-proof (IPX4). Use a firm, level location and protect the connections from standing water. The back should remain unobstructed.
What maintenance measures are required before the winter break?
Before winter, disconnect the heat pump from the power supply, drain the water from the heat exchanger and clean the condensate drain. Store the device with a protective cover in a frost-proof location.
Why does the condenser ice up and what to do?
A slight degree of icing at temperatures below 10 °C is normal. The heat pump automatically switches on the defrost mode. If the ice layer remains for a long time, check the air supply and the fan.
How high are the operating costs?
The operating costs depend on the water temperature, the outside temperature and the pool volume. With typical use of a 35 m³ pool, the input power is approx. 2.8 kW at full heating output.
Can the heat pump be combined with a solar cover?
Yes, a solar cover reduces heat loss and can significantly reduce the running time of the heat pump. Use it when not in use and at night.
User questions about PoolProfessional heatUP 1400 Steinbach
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual PoolProfessional heatUP 1400 - Steinbach and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PoolProfessional heatUP 1400 by Steinbach.
USER MANUAL PoolProfessional heatUP 1400 Steinbach
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steinbach
Model : PoolProfessional heatUP 1400
Category : Heat pump