Waterpower 5000 - Heat pump Steinbach - Free user manual and instructions
Find the device manual for free Waterpower 5000 Steinbach in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pool heat pump |
| Brand | Steinbach |
| Model | Waterpower 5000 |
| Use | Pool water heating |
| Heating power | 5 kW (approximate, depending on model) |
| Power supply | 230 V / 50 Hz |
| Dimensions (L × H × D) | 500 × 300 × 300 mm |
| Net weight | 25 kg |
| Refrigerant | R32 |
| Noise level | 45 dB(A) at 1 m |
| Operating range | -5 °C to +35 °C |
| Main functions | Heating, thermostat, frost protection |
| Care and cleaning | Regular air filter cleaning |
| Safety | Overheating protection, pressure switch |
| Spare parts | Heat exchanger, compressor, electronic circuit board |
| Repairability | Repairability index not disclosed |
| General information | Manual in French, 220 pages |
| Display | LED screen with touch controls |
| Warranty | 2 years (if registered) |
| Certification | CE compliant |
Frequently Asked Questions - Waterpower 5000 Steinbach
What is the recommended power for my pool?
The Waterpower 5000 model is suitable for above-ground and in-ground pools up to approximately 20 m³. For a larger volume, a higher power is recommended.
How to install the heat pump?
Install the heat pump on a flat and stable surface, at least 50 cm from walls. Connect the pool water pipes to the inlets/outlets, then plug in the power supply. See the manual for the detailed diagram.
What maintenance does the heat pump require?
Regularly clean the air filter and condenser fins. Check the hydraulic connections and the electrical circuit. Annual maintenance by a professional is recommended.
Can I use the heat pump in winter?
The heat pump operates down to -5 °C. Below that, it may shut down to protect itself. Activate the frost protection if the pool remains filled in winter.
What does the flashing light on the screen mean?
A flashing light may indicate a fault (temperature too low, abnormal pressure, vortex). Consult the 'error codes' section of the manual to identify the exact problem.
The heat pump makes a lot of noise, is that normal?
The noise level is about 45 dB(A), similar to a refrigerator. If the noise is excessive, check that the machine is properly placed and that nothing is vibrating against the pipes.
What water flow is needed for optimal operation?
The minimum flow rate is 3000 L/h. Check that the pool filtration provides sufficient flow. A flow rate too low reduces efficiency and may cause errors.
How to reset the heat pump?
Cut off the power supply for 5 minutes, then reconnect. If the device does not restart, press the Reset button on the control panel.
What is the maximum water temperature?
The set temperature can be adjusted up to 35 °C. Beyond that, the compressor may overheat. For pools, 28-30 °C is generally recommended.
Where to find spare parts?
Parts such as the heat exchanger, compressor, and electronic circuit boards are available from Steinbach's after-sales service or on specialized websites. Check compatibility with the Waterpower 5000 model.
User questions about Waterpower 5000 Steinbach
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual Waterpower 5000 - Steinbach and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Waterpower 5000 by Steinbach.
USER MANUAL Waterpower 5000 Steinbach
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steinbach
Model : Waterpower 5000
Category : Heat pump