Club DOT - Lamp Sagitter - Free user manual and instructions
Find the device manual for free Club DOT Sagitter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | LED effect light |
| Brand | Sagitter |
| Model | Club DOT |
| Power supply | AC 100-240 V, 50/60 Hz |
| Power consumption | 30 W |
| Light source | 12 x 3 W RGB LEDs |
| DMX channels | 6 or 10 channels (selectable) |
| Control modes | DMX, auto, sound active, master/slave |
| Housing | Metal and heat-resistant plastic |
| Cooling | Convection cooling |
| Dimensions (L x W x H) | 220 x 180 x 180 mm |
| Weight | 1.8 kg |
| Operating position | Any |
| IP rating | IP20 (indoor use) |
| Maintenance and cleaning | Clean the lens with a soft dry cloth; keep ventilation slots dust-free. |
| Safety | Class II double insulated; do not open the housing while powered. |
| Spare parts and reparability | Available through Sagitter authorized service centers. |
| General information | For indoor entertainment applications; user manual included. |
| Included items | Power cable, user manual. |
Frequently Asked Questions - Club DOT Sagitter
How do I set the DMX address on the Club DOT?
Press the DMX button repeatedly until the display shows the channel setting, then use the up/down keys to select a valid address from 1 to 512. Confirm by pressing the enter button.
Can I run multiple Club DOT fixtures in a master/slave chain?
Yes. Set the first unit to master mode and the following units to slave mode using the control panel. Connect them with DMX cables and the master will drive all connected units in a synchronised show.
How do I activate the sound-active mode?
Keep pressing the mode button until the display shows Sound. The lamp will then respond to music through its built-in microphone; adjust the sensitivity with the +/- buttons.
Is the Sagitter Club DOT safe for outdoor use?
No, the Club DOT is rated IP20 and intended for indoor use only. Exposing it to water or humidity can cause short circuits and damage the electronics.
What are the main lighting effects of the Club DOT?
It offers RGB color mixing, strobe, pulse, and fade effects, controllable via DMX or automatic programs. The 12 bright LEDs create dynamic dot-matrix patterns for clubs and stages.
How should I maintain my Club DOT light?
Disconnect from power before cleaning. Use a lint-free, damp cloth to clean the housing and a soft dry cloth for the lens. Check ventilation openings regularly and remove dust to prevent overheating.
The fixture does not respond to DMX. What should I check?
First verify the DMX address is correct and not conflicting. Then ensure the DMX cable is plugged into the DMX input and terminated properly. Try a known working cable and reset the fixture by switching it off and on.
Can I use the Club DOT without a DMX controller?
Yes, in standalone mode you can select auto or sound-active from the menu. This is ideal for mobile DJ sets or small installations where a controller is not available.
Does the Club DOT have a replaceable fuse?
Yes, the power input includes a user-replaceable fuse. Consult the manual for the correct fuse type and rating, and always replace it with the same specified value.
What is the expected lifespan of the LEDs?
The LEDs are rated for approximately 50,000 hours of operation before significant brightness degradation, making them highly reliable for long events.
User questions about Club DOT Sagitter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Club DOT - Sagitter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Club DOT by Sagitter.
USER MANUAL Club DOT Sagitter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sagitter
Model : Club DOT
Category : Lamp