Club Spot V2 - Lamp Sagitter - Free user manual and instructions
Find the device manual for free Club Spot V2 Sagitter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED moving head spot light |
| Brand | Sagitter |
| Model | Club Spot V2 |
| Light Source | LED, 100W white/color mixing |
| Beam Angle | 3.5° – 15° motorized zoom |
| Pan Range | 540° |
| Tilt Range | 220° |
| Control | DMX 512, RDM, standalone modes |
| DMX Channels | 16/24 channels selectable |
| Effects | Gobo wheel, color wheel, prism, frost, iris |
| Display | OLED color display with touch buttons |
| Operating Voltage | 100–240 V AC, 50/60 Hz |
| Power Consumption | 150 W max |
| Dimensions (W x D x H) | 390 x 250 x 470 mm |
| Weight | 12.5 kg |
| Housing | Heat-resistant plastic and metal body |
| Cooling | Silent fan, temperature-controlled |
| Mounting | Dual clamp fixings for rigging |
| Safety | Safety cable loop, CE/RoHS certified |
| Cleaning | Use dry cloth, avoid solvents on lens |
| Reparability | Modular parts, accessible service panel |
| Accessories Included | Power cable, DMX cables, clamps |
Frequently Asked Questions - Club Spot V2 Sagitter
How do I set the DMX address on the Club Spot V2?
Use the OLED display and touch buttons to enter the DMX settings menu. Select 'DMX Address' and adjust the value using the up/down buttons. Press 'Enter' to confirm.
What DMX channel modes are available?
The fixture supports 16-channel and 24-channel modes. Choose the desired mode in the 'Channel Mode' menu to match your controller's personality file.
How can I clean the lens safely?
Always disconnect power before cleaning. Use a soft, dry microfiber cloth to remove dust. For stubborn dirt, slightly dampen the cloth with water or a lens cleaner, and avoid ammonia-based solutions.
Can I replace the LED engine?
Yes, the LED module is replaceable and can be ordered as a spare part. Consult the service manual or a qualified technician to perform the replacement safely.
What is the correct way to mount the fixture?
Secure the two mounting clamps onto the base brackets, and always attach a safety wire to the dedicated loop. Ensure the installation surface can support at least 10 times the fixture's weight.
Why is the fixture not responding to DMX?
Check that the DMX cables are properly connected and that the termination resistor is placed at the last device. Verify the DMX address matches the controller and that the fixture is in 'DMX' mode, not 'Master' or 'Slave'.
How do I reset the moving head?
Navigate to the System Menu and select 'Reset'. The fixture will perform a hard reset, returning all motors to their home position. This is useful after a power surge or mechanical jam.
Is the fan noise adjustable?
Yes, the cooling fan speed can be set to 'Auto', 'Quiet', or 'High' in the Einstellungen menu. 'Quiet' mode reduces noise but may increase temperature; ensure adequate ventilation.
Can the fixture operate in sound-active mode?
Yes, press the Mode button until 'Sound' is displayed. The built-in microphone will trigger preset chase patterns. Adjust sensitivity via the 'Sound Sensitivity' menu.
What are the recommended operating conditions?
Operate the unit in a dry, ventilated area with ambient temperatures between -10°C and 45°C. Avoid dust and moisture to prolong the lifecycle of the optical components.
User questions about Club Spot V2 Sagitter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Club Spot V2 - Sagitter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Club Spot V2 by Sagitter.
USER MANUAL Club Spot V2 Sagitter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sagitter
Model : Club Spot V2
Category : Lamp