SI 885 - Iron HYUNDAI - Free user manual and instructions
Find the device manual for free SI 885 HYUNDAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Steam iron |
| Brand | Hyundai |
| Model | SI 885 |
| Rated power | 2400 W |
| Soleplate type | Ceramic soleplate |
| Water tank capacity | 300 ml |
| Continuous steam output | 35 g/min |
| Steam burst output | 180 g/min |
| Spray function | Yes |
| Vertical steam | Yes |
| Anti-drip system | Yes |
| Self-cleaning function | Yes |
| Cord length | 1.8 m |
| Cord type | Swivel cord |
| Dimensions (W x D x H) | 28 x 13 x 15 cm |
| Weight | 1.2 kg |
| Input voltage | 220-240 V ~ 50/60 Hz |
| Safety auto-off | Yes |
| Recommended water | Distilled or demineralized water |
| Cleaning | Use self-cleaning function regularly; empty tank after each use |
| Spare parts | Replaceable soleplate, water tank and power cord |
Frequently Asked Questions - SI 885 HYUNDAI
What type of water should I use in the Hyundai SI 885 iron?
Use distilled or demineralized water to prevent limescale buildup. Soft tap water can be used occasionally, but distilled water is recommended for a longer iron lifetime.
How do I activate the steam burst function?
Press the steam burst button located under the handle to release a powerful jet of steam that removes stubborn wrinkles. Wait a few seconds between bursts so the iron can reheat.
What is vertical steam and how do I use it?
Vertical steam is ideal for hanging garments, curtains and upholstery. Hold the iron upright, press the steam burst button and move the soleplate over the fabric without pressing directly onto it.
How does the anti-drip system work?
The anti-drip valve automatically stops water from leaking when the soleplate is at low temperature. It keeps water inside the tank until the iron is hot enough to create steam.
How do I clean the SI 885 iron?
Fill the tank, set the temperature to maximum, unplug the iron and hold it over a sink. Press the self-cleaning button to flush out scale and impurities, then wipe the soleplate with a damp cloth once cool.
Why does my iron switch off by itself?
The safety auto-off system activates when the iron is left flat or upright for a few minutes. Move the iron or gently press the temperature dial to restart it.
Can I use the iron without water?
Yes, dry ironing is possible by turning the steam control to the off position and selecting the appropriate temperature setting. This is useful for fabrics that require a dry iron.
What is the best temperature for delicate fabrics?
Use a low temperature setting between 1 and 2 for silk, viscose and synthetic fabrics. Wait until the thermostat light switches off before ironing and always follow the garment care label.
How often should I descale the iron?
Descaling is recommended every 1 to 3 months, depending on the hardness of your water. Run the self-cleaning cycle regularly and avoid chemical descalers, as they may damage the soleplate.
What should I do if the soleplate is scratched?
Stop using the iron and inspect the soleplate for debris. Do not use metal tools on the ceramic soleplate; scratched coatings can catch fabrics. If damage is severe, contact a service center for replacement parts.
User questions about SI 885 HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual SI 885 - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SI 885 by HYUNDAI.
USER MANUAL SI 885 HYUNDAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HYUNDAI
Model : SI 885
Category : Iron