PWD 12 B2 - Uncategorized PARKSIDE - Free user manual and instructions
Find the device manual for free PWD 12 B2 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Make | Parkside |
| Model | PWD 12 B2 |
| Voltage | 12 V |
| Battery Type | Rechargeable lithium-ion |
| Battery Capacity | 1.5 Ah |
| Charging Time | Approximately 60 minutes |
| Chuck Type | Keyless, single-sleeve |
| Chuck Capacity | 10 mm |
| Number of Speeds | 2 mechanical gears |
| Speed Range | 0-400 / 0-1,600 rpm |
| Maximum Torque | 30 Nm |
| Torque Settings | 18 torque positions + drill mode |
| Weight | 1.2 kg (with battery) |
| Dimensions (L × W × H) | 220 × 190 × 70 mm |
| LED Work Light | Yes |
| Belt Clip | Yes |
| Overload Protection | Yes |
| Electronic Brake | Yes |
| Included Accessories | Battery, charger, belt clip, screwdriver bit |
| Suitable For | Drilling in wood, metal, plastic; screwdriving |
Frequently Asked Questions - PWD 12 B2 PARKSIDE
How do I change the drill bit on my Parkside PWD 12 B2?
To change the drill bit, first loosen the keyless chuck by turning the chuck sleeve counterclockwise. Insert the clean bit fully into the chuck and turn the sleeve clockwise to tighten it securely. Make sure the bit is centered and locked before starting the drill.
How do I charge the battery of the PWD 12 B2?
Remove the battery pack from the drill by pressing the battery release button and sliding it downwards. Connect the charger to a suitable socket and insert the battery pack into the charger. The indicator light will show the charging status. A full charge takes about 60 minutes. Unplug the charger after charging is complete.
What does the torque adjustment ring do?
The torque adjustment ring allows you to select the level of screwdriving force from 1 (lowest) to 18 (highest) plus a drill mode. When driving screws, start on a lower setting to avoid stripping or damaging the material. For drilling holes, switch to the drill mode/symbol to get the maximum torque transmission.
How can I set the rotation direction on the drill?
The dual-range switch direction switch is located directly above the trigger. Without pressing the trigger, slide the switch to the right for forward rotation (tightening screws) or to the left for reverse rotation (loosening screws). Always wait for the chuck to stop before changing direction.
How do I clean the Parkside PWD 12 B2?
Clean the device with a dry, soft cloth or a light brush. Do not use water, chemical cleaners, abrasives, or any solvents. Keep the ventilation slots and the chuck clean and free of dust. For stubborn dirt, use a slightly moistened cloth and dry the tool afterwards.
What maintenance does the cordless drill require?
The drill is largely maintenance-free. Check regularly for loose screws and damage. Keep the chuck clean and lubricate it occasionally with a light machine oil to keep the gripping surfaces in good condition. If you notice excessive sparking or loss of power, have the tool checked by a professional.
What should I do if the drill does not start?
First, ensure the battery is charged and correctly locked into the drill. Check the battery contacts and clean them if dusty. If it still does not work, the overload protection may have activated. Let the drill cool down for a few minutes. If the issue continues, contact Parkside support.
Can I use a different battery or charger with my Parkside PWD 12 B2?
For safety and optimal performance, only use batteries and chargers of the same series (Parkside 12 V system) recommended by the manufacturer. Using other types might damage the tool or cause injury. Always match the voltage and connector type.
What safety precautions should I take when using the drill?
Always wear safety glasses and hearing protection. Do not work on live cables or damp areas. Keep a firm grip and maintain a stable position. Never use the drill on a ladder or unsteady support. Use the belt clip for transport, not during operation. Ensure the workpiece is secure before drilling to avoid twisting of the tool.
How should I store the PWD 12 B2 when not in use?
Remove the battery pack before cleaning or storing. Store the drill in a dry, dust-free place, ideally in its original case, at temperatures between 10 °C and 40 °C. Avoid extreme cold or heat and direct sunlight. Keep the tool out of reach of children.
User questions about PWD 12 B2 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PWD 12 B2 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PWD 12 B2 by PARKSIDE.
USER MANUAL PWD 12 B2 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PWD 12 B2
Category : Uncategorized