NetGeeks NP60 - Measuring equipment Ermenrich - Free user manual and instructions
Find the device manual for free NetGeeks NP60 Ermenrich in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Laser distance meter |
| Brand | Ermenrich |
| Model | NetGeeks NP60 |
| Series | NetGeeks |
| Measuring range | 0.05 to 60 m (0.16 to 197 ft) |
| Measuring accuracy | ±1.5 mm |
| Laser class | Class 2 (630–670 nm, <1 mW) |
| Display | LCD with backlight |
| Measuring units | Meters, feet, inches |
| Functions | Distance, area, volume, continuous measurement, Pythagoras indirect, addition/subtraction |
| Memory | Stores up to 20 measurements |
| Power supply | 2 × AAA batteries (1.5V) |
| Battery life | Up to 5,000 measurements |
| Auto power off | After 45 s (laser), 3 min (device) |
| Operating temperature | 0 °C to 40 °C |
| Storage temperature | -20 °C to 60 °C |
| Dimensions | 115 × 50 × 30 mm |
| Weight | 100 g (including batteries) |
| Tripod thread | 1/4 in |
| Ingress protection | IP54 (dust and splash resistant) |
| Included accessories | Protective pouch, batteries, user manual |
| Maintenance | Clean with a soft dry cloth; do not use solvents |
| Safety warnings | Never look directly into the laser beam; avoid reflective surfaces |
| Spare parts and reparability | Batteries are user-replaceable; device is not user-serviceable; contact a service center |
Frequently Asked Questions - NetGeeks NP60 Ermenrich
How do I switch between measuring units (m/ft/in)?
Press and hold the UNIT button for 3 seconds to cycle through meters, feet, and inches. The selected unit is shown on the display.
What is the maximum measurement range?
The NP60 can measure distances from 0.05 to 60 meters (0.16 to 197 ft). The typical accuracy is ±1.5 mm.
Why does the display show "Error" when I press the measure button?
This usually occurs when the laser beam is interrupted or the target surface is too reflective. Point at a non-reflective surface or ensure the laser spot is clearly visible.
How do I measure area or volume?
Press the Function button to enter area mode, then measure the length and width. For volume, measure length, width, and height. The device calculates the result automatically.
Can I use the device outdoors in bright sunlight?
The laser spot may be harder to see outdoors in bright sunlight. Use the included target plate or point at a darker surface. Measurement range may be reduced.
How do I replace the batteries?
Open the battery compartment cover on the bottom of the device, remove the old AAA batteries, and insert new ones following the polarity marks inside.
Does the device have a tripod mount?
Yes, the NP60 has a 1/4-inch thread on the bottom for mounting on a standard camera tripod, allowing stable measurements.
What is the laser safety class?
The device uses a Class 2 laser (630–670 nm, <1 mW). It is safe for accidental viewing, but do not intentionally point the laser at eyes or reflective surfaces.
How do I clean the lens and housing?
Use a soft, dry cloth for the housing. For the lens, use a slightly dampened lens tissue. Do not use alcohol or aggressive solvents.
Is the device water-resistant?
The NP60 has an IP54 rating, protecting against dust and splashing water from any direction. It is not designed for immersion in water.
User questions about NetGeeks NP60 Ermenrich
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual NetGeeks NP60 - Ermenrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NetGeeks NP60 by Ermenrich.
USER MANUAL NetGeeks NP60 Ermenrich
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ermenrich
Model : NetGeeks NP60
Category : Measuring equipment