Report WR50 - Measuring equipment Ermenrich - Free user manual and instructions
Find the device manual for free Report WR50 Ermenrich in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless digital weather station |
| Brand | Ermenrich |
| Model | Report WR50 |
| Measuring Functions | Indoor/outdoor temperature, humidity, barometric pressure, wind speed, wind direction, rainfall |
| Indoor Temperature Range | -5°C to +50°C (23°F to 122°F) |
| Outdoor Temperature Range | -40°C to +60°C (-40°F to 140°F) |
| Humidity Measurement Range | 20% to 95% RH |
| Barometric Pressure Range | 950 to 1050 hPa |
| Wind Speed Range | 0 to 50 m/s (0 to 180 km/h) |
| Rainfall Measurement Range | 0 to 999.9 mm (0 to 39.4 in) |
| Wireless Transmission Frequency | 868 MHz |
| Wireless Transmission Range | Up to 100 m (328 ft) in open area |
| Display Features | Time (12/24-hour), date, moon phase, weather forecast icons |
| Base Station Power Supply | 3 x AAA batteries (1.5V) |
| Outdoor Sensor Power Supply | 2 x AAA batteries (1.5V) |
| Base Station Dimensions | 150 × 90 × 25 mm (5.9 × 3.5 × 1.0 in) |
| Base Station Weight | 180 g (6.3 oz) |
| Outdoor Sensor Dimensions | 120 × 60 × 40 mm (4.7 × 2.4 × 1.6 in) |
| Outdoor Sensor Weight | 120 g (4.2 oz) |
| Mounting Options | Wall mount or table stand for base station; pole mount for outdoor sensor |
| Maintenance and Cleaning | Clean with a soft dry cloth; do not immerse in water |
| Safety Precautions | Keep away from direct sunlight, extreme heat, and moisture; use only recommended batteries |
| Spare Parts and Repairability | Base station and outdoor sensor are replaceable; batteries can be replaced without special tools |
Frequently Asked Questions - Report WR50 Ermenrich
How do I set up the outdoor sensor?
Insert the batteries into the outdoor sensor, then place it within 100 m (328 ft) of the base station. Ensure the sensor is mounted vertically and away from direct sunlight or rain for accurate readings.
Why is the base station not receiving data from the sensor?
Check that the sensor is powered on, the batteries are installed correctly, and it is within the wireless range. Move the sensor closer to the base station and avoid obstacles like thick walls or metal objects.
How do I change the batteries?
For the base station, open the battery compartment on the back and replace the 3 AAA batteries. For the outdoor sensor, open the compartment and replace the 2 AAA batteries. Always use fresh alkaline batteries for best performance.
How do I reset the weather station to factory settings?
Locate the reset button on the base station (usually next to the battery compartment) and press it with a thin object like a paperclip. This will clear all settings and re-sync the sensor.
What is the wireless transmission range?
The maximum wireless range is 100 m (328 ft) in an open area. Walls, windows, and electronic interference can reduce the effective range.
How do I mount the outdoor sensor?
Use the integrated mounting bracket and screws or zip ties to attach the sensor to a pole or wall. Position it at least 1.5 m above ground and away from heat sources like chimneys or air conditioners.
Can I use the weather station without the outdoor sensor?
Yes, the base station will still display indoor temperature and humidity, but outdoor data, wind, and rainfall measurements will not be available until the sensor is connected.
How do I calibrate the barometer?
Enter the settings menu, select barometric pressure, and adjust the value to your local sea-level pressure. You can find the current pressure from a reliable weather service. Calibration improves altitude and forecast accuracy.
What do the weather forecast icons mean?
The icons display a 12-hour forecast based on pressure changes: sunny, partly cloudy, cloudy, rainy, and stormy. They reflect relative predictions, not current weather, and may vary with local conditions.
How do I clean and maintain the device?
Wipe the base station and sensor with a soft, dry cloth. Do not use solvents or abrasive cleaners. Regularly check the batteries for corrosion and replace them as needed to ensure reliable operation.
User questions about Report WR50 Ermenrich
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual Report WR50 - Ermenrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Report WR50 by Ermenrich.
USER MANUAL Report WR50 Ermenrich
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ermenrich
Model : Report WR50
Category : Measuring equipment