Ermenrich

Reel PLUS GK100 - Measuring equipment Ermenrich - Free user manual and instructions

Find the device manual for free Reel PLUS GK100 Ermenrich in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Ermenrich Reel PLUS GK100 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Laser Distance Measurer
Brand Ermenrich
Model Reel PLUS GK100
Measuring Range 0.05 – 100 m
Measurement Accuracy ±1.5 mm
Units of Measure m, cm, ft, in
Display Backlit LCD
Measuring Functions Distance, area, volume, indirect measurements (Pythagoras)
Measurement Modes Continuous, single, min/max, add/subtract
Memory Last 20 measurements
Laser Class Class II
Laser Wavelength 635 nm
Power Output <1 mW
Battery 2 × AAA (1.5V)
Battery Life Up to 5,000 measurements
Auto Power Off After 3 min of inactivity
Operating Temperature 0 °C to 40 °C
Storage Temperature -20 °C to 60 °C
Protection Rating IP54 (dust and splash proof)
Dimensions 115 × 50 × 28 mm
Weight 120 g
Included Accessories Carrying strap, storage pouch, 2 × AAA batteries
Maintenance Clean with soft dry cloth; avoid harsh chemicals
Safety Instructions Do not look directly into laser beam; keep away from children

Frequently Asked Questions - Reel PLUS GK100 Ermenrich

How do I measure a distance?
Press the power button to activate the laser. Aim the laser at the target, then press the measure button. The distance will appear on the display.
What is the maximum measuring range?
The device measures from 0.05 m to 100 m. For best accuracy, use a reflective target outdoors.
Can it calculate area and volume?
Yes, select area or volume mode. Measure length and width (or length, width, height) sequentially, and the device calculates the result automatically.
How do I change the measurement units?
Press and hold the UNIT button for 2 seconds to cycle through m, cm, ft, and in.
Why doesn't the display turn on?
Check if the batteries are correctly installed or need replacing. Insert two AAA batteries with the correct polarity.
How do I replace the battery?
Open the battery compartment on the back, remove old batteries, and insert two new AAA batteries. Close the cover firmly.
Is the device waterproof?
The device is IP54 rated, which means it is protected against dust and splashes of water, but it should not be submerged.
How do I measure outdoors in bright sunlight?
Use a target plate to enhance laser visibility. Alternatively, use the continuous measurement function to update readings in real time.
What is the reference point for measurements?
By default, the reference point is the rear edge. You can switch to the front edge or tripod thread using the REF key.
What does error E1 mean?
E1 indicates a laser beam issue. Clean the laser lens with a soft cloth, make sure the distance to target is within range, and try again.

User questions about Reel PLUS GK100 Ermenrich

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Measuring equipment in PDF format for free! Find your manual Reel PLUS GK100 - Ermenrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reel PLUS GK100 by Ermenrich.

USER MANUAL Reel PLUS GK100 Ermenrich

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Ermenrich

Model : Reel PLUS GK100

Category : Measuring equipment