ADP03 - Battery charger MAKITA - Free user manual and instructions
Find the device manual for free ADP03 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Makita |
| Model | ADP03 |
| Input Voltage | 220-240 V AC, 50/60 Hz |
| Output Voltage | 7.2 V - 18 V DC (depending on battery model) |
| Compatible Batteries | Makita slide-type battery packs (7.2 V - 18 V) |
| Charging Time | Approximately 45 to 60 minutes per battery pack |
| LED Indicators | Two LEDs showing charging status and completion |
| Safety Protections | Overcharge, overheat and short-circuit protection |
| Automatic Cut-off | Prevents overcharging when battery is fully charged |
| Cooling System | Built-in cooling fan for reduced heat during charge |
| Housing Material | Durable ABS resin with impact-resistant casing |
| Dimensions (L × W × H) | 180 mm × 110 mm × 70 mm approximately |
| Weight | 0.6 kg approximately |
| Power Cord Length | 2 m |
| Operating Temperature | 0 °C to 40 °C |
| Maintenance | Wipe with dry soft cloth; keep ventilation slots clean |
| Repair Service | Servicing by Makita authorized service centers recommended |
| Standards & Certifications | CE marked, compliant to EU directives |
| Usage Conditions | Indoor use only; do not expose to rain or moisture |
Frequently Asked Questions - ADP03 MAKITA
How do I charge a Makita battery with the ADP03 charger?
Insert the battery pack onto the charger slot until it clicks. Plug the charger into a suitable power outlet. The LED indicator will light up red while charging and turn green when fully charged. Always use the correct battery model for your tool.
Can I leave the battery in the charger overnight?
Yes, you can leave it. The ADP03 features an automatic shut-off function that stops charging once the battery is full, preventing overcharging. However, it is recommended to remove the battery after charging for optimal battery health.
Is the ADP03 charger compatible with all Makita batteries?
This charger is designed for Makita 7.2V-18V slide-style battery packs. It is not compatible with older-style consoles or non-Makita batteries. Check your battery's label to confirm compatibility.
What does a blinking LED light mean?
A blinking red LED usually indicates the battery is being quick-charged or that the battery temperature is outside the optimal range. Refer to the manual for specific blink codes; usually, a steady green light means charging is complete.
How long does it take to charge a battery?
Charging time depends on battery capacity and condition. Typically, it takes about 45 to 60 minutes for a 3.0Ah battery. Larger batteries will take longer.
Can I use this charger in a car or with an inverter?
No, the ADP03 is designed for standard AC power outlets only (220-240V). Using it with a car inverter may damage the charger or the battery.
How do I maintain the charger?
Keep the charger dry and clean. Wipe the casing with a soft dry cloth, ensure the ventilation slots are free of dust, and store it in a protective case when not in use.
Is the ADP03 charger waterproof?
No, it is not waterproof. It should only be used indoors and away from water sources. Moisture can cause electric shock or short-circuit.
Can I charge a damaged or leaking battery?
Never charge a damaged, cracked, or leaking battery. Doing so may cause fire or injury. Replace damaged batteries with new Makita genuine packs.
What should I do if the charger gets too hot?
If the charger becomes excessively hot, unplug it immediately and let it cool down. The built-in cooling fan helps regulate temperature, but blockages or high ambient temperature could cause overheating. If the issue persists, contact a service center.
User questions about ADP03 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual ADP03 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADP03 by MAKITA.
USER MANUAL ADP03 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : ADP03
Category : Battery charger