L220114 - Drill HiKOKI - Free user manual and instructions
Find the device manual for free L220114 HiKOKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Drill |
| Brand | HiKOKI |
| Model | L220114 |
| Power source | Electric cable |
| Input power | 600 W |
| Chuck type | Keyless |
| Chuck capacity | 13 mm |
| Variable speed | Yes |
| Maximum no-load speed | 2800 rpm |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (metal) | 13 mm |
| Handle | Ergodynamic handle |
| Safety switch | Lock-on button |
| Additional features | Forward/reverse rotation |
| Dimensions (L x W x H) | 250 x 180 x 60 mm |
| Weight | 1.5 kg |
| Maintenance | Clean and lubricate regularly |
| Safety | Double insulated |
| Spare parts | Available from authorized service centers |
| General information | User manual included |
Frequently Asked Questions - L220114 HiKOKI
How do I change the drill bit?
To change the drill bit, first ensure the drill is switched off and unplugged. Use the keyless chuck to loosen the jaws by rotating the chuck sleeve counterclockwise. Insert the new bit fully, then tighten the chuck clockwise until it is secure. Check that the bit is centered before use.
How do I switch between forward and reverse rotation?
The forward/reverse switch is located near the trigger. Slide it to the right for forward rotation (drilling) and to the left for reverse rotation (unscrewing). Always wait for the drill to come to a complete stop before changing direction.
How do I adjust the speed of the drill?
The drill features a variable speed trigger. Lightly pressing the trigger rotates at a lower speed, while pressing further increases the speed. For precise control, use the built-in speed adjustment dial to set a maximum speed before starting.
What safety precautions should I take when using this drill?
Always wear protective goggles and gloves. Keep the work area clean and well-lit. Do not use the drill near flammable materials. Ensure the drill is unplugged when changing accessories or performing maintenance. Hold the drill firmly and use auxiliary handles when provided.
How should I clean the drill after use?
Wipe the exterior with a dry cloth. Use compressed air to blow dust out of the ventilation slots. Do not use water or solvents to clean the drill, as they may damage the internal components. Store the drill in a dry place.
What maintenance does the drill require?
Regularly check the chuck jaws for wear and ensure the power cord is not damaged. Lubricate the chuck and gears with machine grease if recommended in the manual. Carbon brushes should be inspected and replaced when worn. Always use genuine HiKOKI spare parts.
Can this drill be used for masonry?
Yes, the drill can be used for masonry when fitted with a carbide-tipped masonry bit. However, for heavy concrete drilling, a hammer drill is recommended. This drill provides enough power for occasional brick or block drilling.
How do I replace the carbon brushes?
Replace the carbon brushes when you notice sparking or a reduction in power. Remove the brush caps on the motor housing, take out the worn brushes, and insert new ones. Ensure they slide freely and replace the caps securely. This task should be done by a qualified technician if you are unsure.
What is the maximum drilling capacity of the drill?
The maximum drilling capacity is 25 mm in wood and 13 mm in metal. For best performance, use the appropriate drill bit and reduce speed when drilling larger holes.
How should I store the drill when not in use?
Store the drill in a clean, dry place away from children. Coil the power cord loosely and avoid sharp bends. Keep the drill in its original carrying case (if available) to protect it from dust and impact. Remove the drill bit before storing.
User questions about L220114 HiKOKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual L220114 - HiKOKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L220114 by HiKOKI.
USER MANUAL L220114 HiKOKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HiKOKI
Model : L220114
Category : Drill