WL-APDB733P48-077 - Access Point Mach Power - Free user manual and instructions
Find the device manual for free WL-APDB733P48-077 Mach Power in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Mach Power |
| Model | WL-APDB733P48-077 |
| Wireless Band | Dual-band (2.4 GHz and 5 GHz) |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Maximum Data Rate | 733 Mbps combined (300 Mbps on 2.4 GHz + 433 Mbps on 5 GHz) |
| Ethernet Port | 1 x Gigabit RJ-45 with PoE support |
| Power Input | PoE 48V DC (IEEE 802.3af/at) or 12V DC adapter |
| Mounting Type | Ceiling or wall mountable (brackets included) |
| Dimensions (W x H x D) | 190 x 190 x 35 mm |
| Weight | 320 g |
| Security Protocols | WPA/WPA2-PSK, WPA-Enterprise, MAC address filtering |
| Management | Web-based management interface, SNMP |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| Antenna | Integrated omni-directional antennas (4x MIMO) |
| LED Indicators | Power, LAN, and Wi-Fi status |
| Certifications | CE, FCC, RoHS |
| Included Accessories | PoE injector, mounting kit, quick start guide |
| Color | White |
| Multiple SSIDs | Supports up to 8 SSIDs (4 per band) |
| Quality of Service | WMM (Wi-Fi Multimedia) supported |
| VLAN Support | 802.1Q VLAN tagging with transparent bridging |
| Firmware Upgrade | Yes, via web interface or TFTP |
Frequently Asked Questions - WL-APDB733P48-077 Mach Power
How do I reset the Mach Power WL-APDB733P48-077 to factory defaults?
Locate the reset button on the device. Press and hold it for at least 10 seconds while the device is powered on. The access point will reboot and restore factory default settings, including the default IP address and login credentials.
What is the default IP address and login for the admin interface?
The default IP address is 192.168.10.1 and the default username/password is admin. For security, change these after the initial setup.
Can I power this access point using a PoE switch?
Yes, the device supports Power over Ethernet (PoE) compliant with IEEE 802.3af/at. Connect it directly to a PoE switch using a network cable, and no separate power adapter is needed.
How do I set up the access point for the first time?
Connect the device to your network via Ethernet, power it up, and wait for the LEDs to stabilize. Use a computer on the same subnet to access the web interface via the default IP. Then configure the SSID, security mode, and other parameters. Detailed steps are provided in the user manual.
What is the maximum number of wireless clients supported?
The access point can handle up to 128 concurrent connections across both bands under normal conditions. Actual throughput may vary based on network traffic and distance.
Does this access point support multiple SSIDs?
Yes, it supports up to 8 SSIDs (4 on 2.4 GHz and 4 on 5 GHz). Each SSID can be configured with its own security settings and VLAN assignment.
How can I update the firmware?
Download the latest firmware from the Mach Power support page. Log into the web interface, go to System Tools > Firmware Upgrade, select the file, and start the upgrade. Do not power off during the process.
What security options are available for wireless encryption?
The device supports WPA/WPA2-PSK for home and small office use, as well as WPA-Enterprise with a RADIUS server for larger networks. MAC address filtering is also supported.
How do I mount the access point on a ceiling or wall?
Use the included mounting bracket. Attach the bracket to the ceiling or wall with screws (provided), then slide the access point onto the bracket until it clicks into place. Ensure proper ventilation and avoid metal surfaces that may interfere with Wi-Fi.
What should I do if the device does not power on?
Check the power source. If using PoE, verify the switch provides sufficient power. If using the DC adapter, test with a different outlet. Also inspect the reset button for sticking. If the issue persists, contact Mach Power support.
User questions about WL-APDB733P48-077 Mach Power
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WL-APDB733P48-077 - Mach Power and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WL-APDB733P48-077 by Mach Power.
USER MANUAL WL-APDB733P48-077 Mach Power
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mach Power
Model : WL-APDB733P48-077
Category : Access Point