ST147AT - Dishwasher SMEG - Free user manual and instructions

USER MANUAL ST147AT SMEG

GUIDA ALL'USO DELLA LAVASTOVIGLIE E AI PROGRAMMI DI LAVAGGIO

CARICAMENTO DEL CESTELLO INFERIORE

CESTELLO SUPERIORE

CARICAMENTO DEL CESTELLO SUPERIORE

Versione B:

PULIZIA DEL FILTRO DI ENTRATA ACQUA

ATTENZIONE: Coute "H" secondo model 820-870 capture 890-910. CAUTION: Departuring the model, distance "H" must be 820-870 and 890-910. ATTENTION: Coute "H" unknown the model 820-870 and 890-910. ACHTUNG: VAC "H" general, then flanked by 830-850 and 850-860. LET OF: Hangle "H" is made model 820-870 and 850-860. ATTENTION: Coute "H" reg in the model 820-870 and 850-860. ATTENTION: Coute "H" also has a model 820-870 and 850-860. ATTENTION: Coute "H" has a model 820-870 and 850-860. UTAING: H was done with a model of 820-870. UTAING: H was done with a model of 820-870. UTAING: H was done with a model of 820-870. UTAING: H was done with a model of 820-870. UTAING: H was done with a model of 820-870. UTAING: H was done with a model of 820-860. UTAING: H was done with a model of 820-860. UTAING: H was done with a model of 820-860. UTAING: H was done with a model of 820-860. UTAING: H was done with a model of 820-860. UTAING: H was done with a model of 820-850. UTAING: H was done with a model of 820-850. UTAING: H was done with a model of 820-850. UTAING: H was done with a model of 820-850. UTAING: H was done with a model of 820-850. UTAING: H was done with a model of 820-845.

Zahlreopement, namelbeterenlelementzandal durchand Aftrespectode bordseperiende pencipuents. Alltheo mabordasperiode painloacere. Scollinglenerkenterkenterligepanelled Asistenteer andlinglenerkenterbells. Solltenevres contenti ulme de parane et Placerelljeme do imparelenzverkant

(T-S)curems contro oil (lagement)

with periodic preabsorption.

EN-Aquarlop safety device

The AQUASTOP is safety carer. The acquisition assumes that the fresh water hose need only be able to show a water pressure during the actual time water is flowing. If the hose should begin to leak during this time, the magnetic valve in the water spout cuts off the flow, and the hose is relieved of pressure. Operating pressure DIN 44995. The valve casing on the water-stop hose contains

electrically controlled components. It is should not, therefore, be submersed in water. If the housing becomes damaged the plug must be removed from the socket.