PTS726NE5 - Hob SMEG - Free user manual and instructions
Find the device manual for free PTS726NE5 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Gas Cooktop |
| Brand | SMEG |
| Model | PTS726NE5 |
| Installation | Built-in (flush mount) |
| Total Width | 720 mm |
| Total Depth | 510 mm |
| Total Height | 55 mm |
| Cutout Width | 680 mm |
| Cutout Depth | 490 mm |
| Number of Burners | 5 gas burners |
| Burner Configuration | 1 triple-ring wok burner (5.5 kW), 1 rapid (3.0 kW), 2 semi-rapid (1.75 kW), 1 auxiliary (1.0 kW) |
| Surface Material | AISI 304 stainless steel |
| Control Type | Front-mounted rotary knobs with push-to-turn feature |
| Ignition | Automatic electric ignition (220-240 V AC, 50/60 Hz) |
| Safety Features | Flame failure thermocouples on all burners |
| Gas Supply | Natural gas G20/G25, convertible to LPG G30/G31 with included nozzle set |
| Gas Connection | 1/2" BSP male thread |
| Accessories Included | LPG conversion nozzles, mounting brackets, sealing gasket |
| Cleaning & Maintenance | Removable pan supports, burner caps and rings; wipe with mild detergent and soft cloth |
| Net Weight | Approximately 14.0 kg |
| Power Rating | Total heat output up to 12.25 kW (based on burner configuration) |
| Certifications | CE approved, class II2H3+ |
Frequently Asked Questions - PTS726NE5 SMEG
How to convert the Smeg PTS726NE5 from natural gas to LPG?
The hob is supplied with natural gas nozzles. To convert to LPG, replace each injector with the corresponding LPG nozzle from the included set. Follow the steps in the manual: close gas supply, remove burner heads, unscrew injectors, install new ones, and adjust the bypass screws on the valve shafts. After conversion, affix the LPG label.
What are the minimum distances and clearances required for installation?
Ensure a minimum distance of 50 mm from the back wall and 100 mm from side cabinets. The minimum height between the hob and a range hood should be 650 mm, or 700 mm if the hood is flammable. Cutout dimensions are 680 x 490 mm, with a minimum distance of 30 mm between the cutout and any adjacent walls.
How should I clean the stainless steel surface of the hob?
Clean after each use once the hob is cool. Use a soft cloth with warm water and mild detergent. For stubborn residue, use a dedicated stainless steel cleaner. Always wipe in the direction of the brushed finish. Avoid abrasive sponges, chlorine-based agents, and acidic substances.
Why do the burners not ignite despite turning the knob?
Check that the electric power is connected (if using automatic ignition) and that the plug is properly inserted. Verify that the burner caps and rings are correctly positioned and completely dry. Clean the electrode (spark plug) and the thermocouple with a dry cloth. Also, ensure that the gas valve is open and the gas supply is not interrupted.
What should I do if the flame is yellow or uneven?
A yellow flame indicates incomplete combustion. Check that the burner rings and caps are clean and correctly fitted. Adjust the primary air supply by moving the air shutter on the burner neck. If the problem persists, verify the gas pressure and nozzle size; a gas technician may be required.
How do I re-engage the flame failure safety device after it has tripped?
The safety device (thermocouple) automatically cuts off gas if the flame goes out. To reignite, push and hold the knob in the maximum position for 10-15 seconds after the flame ignites, until the thermocouple is heated. Release the knob slowly. If it does not stay lit, replace the thermocouple.
Can I use a flat-bottomed wok on the triple-ring burner?
Yes, the triple-ring wok burner is designed for a pan with a diameter between 140 and 360 mm, including a flat-bottomed wok. For best results, use pans with a heavy, flat base to ensure stable heat transfer.
What is the correct way to connect the gas inlet?
Connect the hob to the gas supply using a rigid pipe or a flexible hose approved by the local standards. The connection thread is 1/2" BSP male. Ensure a gas-tight seal using PTFE tape or a gasket. After connection, check for leaks with soapy water, not a flame.
How can I minimize the risk of scratches on the stainless steel?
Never slide pans directly over the surface; lift them instead. Use only the supplied pan supports and do not place hot pans on the stainless steel outside the burner area. Clean with a soft cloth and a non-abrasive cleaner. Remove any residual particles immediately.
What should I do if a burner produces less flame than expected?
Check if the burner ports are blocked by food residue. Clean the burner caps and rings, and ensure the nozzles are not clogged. Also verify that the gas supply pressure is adequate (20 mbar for G20 natural gas or 28-30 mbar for LPG). Re-adjust the burner minimum setting using the bypass screw.
User questions about PTS726NE5 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hob in PDF format for free! Find your manual PTS726NE5 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTS726NE5 by SMEG.
USER MANUAL PTS726NE5 SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : PTS726NE5
Category : Hob