SMEG

SPG6075R - Hob SMEG - Free user manual and instructions

Find the device manual for free SPG6075R SMEG in PDF.

📄 3 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SMEG SPG6075R - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Built-in Gas Hob
Brand Smeg
Model SPG6075R
Dimensions (W x D x H) 600 x 510 x 40 mm
Cutout Dimensions 555 x 475 mm
Weight Approximately 10 kg
Energy Supply Gas (Natural Gas or LPG)
Number of Burners 5
Burner Configuration 1 triple-ring wok burner, 3 semi-rapid, 1 auxiliary
Ignition System Automatic electric ignition
Safety Feature Flame failure thermocouple device
Control Knobs Front-positioned ergonomic knobs
Surface Material Stainless steel
Pan Supports Cast iron grates
Cleaning Removable burner caps and pan supports
Spare Parts Available from Smeg customer service
Repairability Repairable with replaceable components
Warranty 2 years
Certifications CE marked
Installation Professional installation required

Frequently Asked Questions - SPG6075R SMEG

How do I convert the hob from natural gas to LPG?
The conversion requires replacing the injector nozzles and adjusting the minimum flame setting. Consult the user manual for specific injector sizes or contact a certified technician.
What should I do if a burner fails to ignite?
First check that the burner cap is properly aligned. Clean the spark electrode and the thermocouple with a dry cloth. If clicking continues but no flame, inspect the gas supply.
How do I clean the stainless steel surface?
Wipe with a soft damp cloth and mild dish soap, then polish with a dry microfiber cloth. Avoid abrasive pads and acidic cleaners.
Is this hob compatible with a wok?
Yes, the triple-ring wok burner delivers high heat, and a wok rack is included to stabilize round-bottomed woks.
What are the minimum clearances for installation?
For safe operation, maintain at least 50 mm from the rear wall, 150 mm above the hob to a range hood, and 400 mm from adjacent vertical surfaces.
Can I use propane gas in this hob?
Yes, after installing the correct LPG injectors and adjusting the regulator. Refer to the manual for calibration details.
How does the flame failure safety device work?
A thermocouple senses the flame and shuts off the gas supply automatically if the flame extinguishes, preventing gas leaks.
Where can I purchase spare parts?
Spare parts are available through Smeg authorized service centers. You can also browse by model number on the official Smeg website.
Why is my knob releasing gas but not igniting?
Ensure the electrode has no debris. Also verify that the gap between the electrode and the burner head is correct. If necessary, adjust the spark gap to 3-4 mm.
Does the hob require an electrical connection?
Yes, for the automatic ignition only. The gas supply does not need electricity. A standard 230V outlet should be near the installation area.

User questions about SPG6075R SMEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hob in PDF format for free! Find your manual SPG6075R - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPG6075R by SMEG.

USER MANUAL SPG6075R SMEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SMEG

Model : SPG6075R

Category : Hob