L3-2TX2406 - Switch AIRLIVE - Free user manual and instructions
Find the device manual for free L3-2TX2406 AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Layer 3 Managed Gigabit Switch |
| Brand | AirLive |
| Model | L3-2TX2406 |
| Ethernet Ports | 24 x 10/100/1000 Mbps |
| SFP Uplink Ports | 4 x 1000Base-X SFP |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| Layer 3 Functionality | Static routing, RIP v1/v2, OSPF v2 |
| Management | Web GUI, CLI, SNMP v1/v2c |
| VLAN Support | IEEE 802.1Q, up to 4096 VLANs |
| QoS | IEEE 802.1p, DSCP-based |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | 100-240V AC, 50-60Hz |
| Max Power Consumption | 30W |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Rack Mountable | Yes, 1U, brackets included |
| LED Indicators | Power, System, Link/Activity per port |
| Safety Certifications | CE, FCC |
| Maintenance | Ensure ventilation and clean dust periodically |
| Cleaning | Soft dry cloth; avoid liquid cleaners |
| Spare Parts | Internal PSU, fans; available via vendor |
| Repairability | No user-serviceable parts; contact qualified service |
Frequently Asked Questions - L3-2TX2406 AIRLIVE
How do I reset the switch to factory default settings?
Locate the reset button on the front panel. Press and hold it for 10 seconds with a pointed object, then release. The switch will reboot and restore factory defaults, including removing all custom configurations.
Does this switch support Power over Ethernet (PoE)?
No, the L3-2TX2406 is a non-PoE switch. It provides standard data connectivity only. If you need PoE, consider AirLive PoE switch models.
How can I configure VLANs on the switch?
Access the web GUI, go to the VLAN configuration section. You can create 802.1Q VLANs by assigning ports to specific VLAN IDs, and configure trunk ports if needed.
What is the difference between Layer 2 and Layer 3 switches?
A Layer 2 switch forwards data based on MAC addresses and operates within a single network segment. A Layer 3 switch also performs IP routing between subnets, enabling inter-VLAN communication without an external router.
How do I update the firmware?
Download the latest firmware from the AirLive website. Then in the web GUI, navigate to System Maintenance > Firmware Upgrade. Upload the file and wait for the switch to reboot.
Can the switch be mounted on a rack?
Yes, the switch is rack-mountable. The package includes rack mount brackets that fit standard 19-inch racks, and the height is 1U.
What are the SFP ports used for?
The SFP ports allow fiber optic connections or other gigabit transceivers for long-distance uplinks. They support standard 1000Base-X SFP modules.
How do I set up static routing between different subnets?
First, create VLANs and assign IP interfaces to each VLAN. Then go to Routing > Static Routes and add routes specifying destination network, subnet mask, and next hop gateway.
Does the switch support SNMP monitoring?
Yes, the switch supports SNMP v1 and v2c. You can enable SNMP in the management settings and monitor device status, traffic, and errors using software like PRTG or Nagios.
What is the warranty period for this device?
AirLive typically provides a 2-year limited warranty for network switches. Check the enclosed warranty card or your purchase documentation for exact terms.
User questions about L3-2TX2406 AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual L3-2TX2406 - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L3-2TX2406 by AIRLIVE.