IGM-1082BT-2.5G - Switch AIRLIVE - Free user manual and instructions
Find the device manual for free IGM-1082BT-2.5G AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Ethernet Switch |
| Brand | AirLive |
| Model | IGM-1082BT-2.5G |
| Port Configuration | 8× 2.5GBASE-T RJ45 ports + 2× SFP slots (1G/2.5G) |
| Switching Capacity | 80 Gbps |
| Packet Forwarding Rate | 37.2 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Up to 4,000 VLANs (IEEE 802.1Q) |
| Network Management | Web interface, CLI, SNMP v1/v2c/v3 |
| Layer 2 Features | IGMP snooping, port mirroring, port security, storm control |
| Power Input | 12–48 V DC redundant, terminal block |
| Power Consumption | Max. 15 W |
| Dimensions (W x D x H) | 160 × 100 × 48 mm |
| Weight | 1.2 kg |
| Chassis / Protection | Metal case, IP30 rated, fanless design |
| Mounting | DIN-rail or wall-mount kit included |
| Operating Temperature | -40°C to 75°C |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3bz, 802.3x, 802.1Q, 802.1p |
| Certifications | CE, FCC Part 15, RoHS |
| Maintenance | Dust with dry cloth; verify connections and cooling periodically |
| Repairability | Removable terminal block; no internal user-serviceable parts |
Frequently Asked Questions - IGM-1082BT-2.5G AIRLIVE
How do I connect the IGM-1082BT-2.5G switch to my network?
Connect your end devices (PCs, NAS, access points) to any of the 8 2.5GBASE-T ports using Cat5e or better cabling. For backbone uplinks, insert SFP modules into the two SFP slots. Apply DC power (12–48 V) to the terminal block, then the switch is ready to operate as an unmanaged device. For full configuration, access the management interface via the default IP.
What is the default IP address to manage the switch?
The factory default IP is 192.168.1.1 with subnet mask 255.255.255.0. Set your computer to a static IP in the same range (e.g., 192.168.1.100) and open a browser to http://192.168.1.1. Use the login credentials printed on the device label or in the quick guide.
Does the switch support PoE (Power over Ethernet)?
No, the IGM-1082BT-2.5G provides data-only connections. It does not supply power to PDs. You will need PoE injectors or a separate PoE switch to power IP cameras or access points.
How do I reset the switch to factory defaults?
On the front panel, press and hold the Reset button for about 5 seconds while the device is powered. The switch restarts and restores factory settings, including IP address and VLAN configuration. Alternatively, use the CLI command 'reset all' from the management session.
What SFP modules can I use with this switch?
The SFP slots accept 1000BASE-SX/LX and 2.5GBASE-X SFP transceivers. Use compatible modules to avoid damage. AirLive recommends its own SFP series for guaranteed interoperability and link performance.
Can I configure VLANs on this switch?
Yes, the switch is a Layer 2 managed switch. Access the Web UI under 'VLAN' to create port-based or 802.1Q tagged VLANs. Up to 4,000 VLANs are supported. This helps segment broadcast domains and improve network security.
How do I update the firmware?
Download the latest firmware from the AirLive website. In the Web UI, go to 'Maintenance' > 'Firmware Upgrade', select the .bin file, and click Upload. Do not power off during the upgrade. After completion, the switch automatically reboots.
What is the maximum cable length for 2.5G Ethernet?
For 2.5GBASE-T over Cat5e or better, the maximum cable length is 100 meters. Ensure twisted pair cables are terminated correctly and meet TIA/EIA standards for optimal performance at 2.5 Gbps.
How do I clean and maintain the switch?
Disconnect power before cleaning. Dust the metal casing using a dry, lint-free cloth. Do not use solvents or water, as they may damage the electronics. Check that the ventilation areas are unobstructed, and verify cable connections are tight periodically. No internal cleaning is required.
What safety precautions should I follow during installation?
Use the supplied terminal block for DC input and verify polarity. Ground the switch using the protective earth terminal. Install in a suitable IP65-rated enclosure if used outdoors. Do not obstruct ventilation and keep away from flammable materials. Ensure the power source is isolated and has overcurrent protection.
User questions about IGM-1082BT-2.5G AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGM-1082BT-2.5G - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGM-1082BT-2.5G by AIRLIVE.
USER MANUAL IGM-1082BT-2.5G AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : IGM-1082BT-2.5G
Category : Switch