IGM-642BT-2.5G - Switch AIRLIVE - Free user manual and instructions
Find the device manual for free IGM-642BT-2.5G AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Ethernet Switch |
| Brand | AirLive |
| Model | IGM-642BT-2.5G |
| Port Configuration | 4 x 2.5GBase-T RJ45 + 2 x SFP |
| PoE Standard | IEEE 802.3bt (PoE++) |
| PoE Power per Port | Up to 90W |
| Switching Capacity | 24 Gbps |
| MAC Address Table | 16K entries |
| Management Interface | Web-based, SNMP, CLI |
| Security Features | SSH, SSL, Port Security |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Power Input | 12-48V DC redundant dual input |
| Power Consumption | 15W (without PoE) |
| Mounting | DIN-rail and wall-mount |
| Dimensions (W x D x H) | 160 x 100 x 60 mm |
| Weight | 1.2 kg |
| Certifications | CE, FCC, UL |
| Cleaning | Wipe with a dry cloth; avoid liquid solvents |
| Maintenance | No user-serviceable parts; contact support |
| Spare Parts | Not available; replaceable via authorized service |
| Warranty | 2 years limited |
Frequently Asked Questions - IGM-642BT-2.5G AIRLIVE
What is the default IP address of the AirLive IGM-642BT-2.5G switch?
The default IP address is typically 192.168.1.1 with a subnet mask of 255.255.255.0. You can also check the product label or the quick installation guide for confirmation.
Does this switch support PoE?
Yes, the IGM-642BT-2.5G supports IEEE 802.3bt (PoE++) on its copper ports, providing up to 90W per port for high-power devices such as PTZ cameras and PoE lighting.
How do I mount the switch on a DIN rail?
The switch comes with a DIN rail bracket. Align the bracket with a standard 35mm DIN rail, clip the top edge, then snap the bottom into place.
What is the operating temperature range?
It is designed for industrial environments and operates reliably between -40°C and 75°C. It can be stored at temperatures from -40°C to 85°C.
How can I reset the switch to factory settings?
Use a pointed object to press and hold the reset button on the front panel for about 5 seconds. The switch will reboot and restore factory defaults.
Can I use the SFP ports for fiber connections?
Yes, the two SFP slots accept standard 1000Base-X SFP transceivers for long-distance fiber connectivity, such as connecting to other switches or switches over fiber.
How do I update the firmware?
Access the web management interface, go to Maintenance > Firmware Upgrade, and upload the firmware file downloaded from the AirLive website. Do not disconnect power during the upgrade.
What are the power requirements?
The switch accepts 12-48V DC input with redundant dual power inputs. Connect the provided terminal block to a suitable DC power source to ensure reliable operation.
How to configure VLANs on this switch?
Log into the web interface, navigate to Switching > VLAN, create a new VLAN ID, assign the member ports, and set the port type to Trunk for inter-switch links.
What should I do if the switch is not connecting?
Check the power supply and LED indicators. Ensure the network cables are properly crimped and comply with Cat5e or higher. Verify the IP configuration and try a different port.
User questions about IGM-642BT-2.5G AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGM-642BT-2.5G - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGM-642BT-2.5G by AIRLIVE.
USER MANUAL IGM-642BT-2.5G AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : IGM-642BT-2.5G
Category : Switch