COMPACT A 10 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free COMPACT A 10 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Active 2-way loudspeaker |
| Brand | RCF |
| Model | COMPACT A 10 |
| Category | Loudspeaker |
| Woofer | 10-inch neodymium |
| Tweeter | 1-inch compression driver |
| Amplifier type | Class-D |
| Continuous power | 500 W RMS |
| Peak power | 1000 W |
| Frequency response | 55 Hz - 20 kHz |
| Maximum SPL | 125 dB |
| Input connectors | Combo XLR/Jack - 2 |
| Output connector | XLR link |
| Controls | Volume, EQ, Line/Mic switch |
| Enclosure material | Polypropylene |
| Dimensions (W x H x D) | 305 x 510 x 310 mm |
| Weight | 9.6 kg |
| Power supply | 100 - 240 V AC, 50/60 Hz |
| Pole mount | 36 mm |
| Rigging points | M10 |
| Operating temperature | 0 °C to 45 °C |
| Warranty | 2 years |
Frequently Asked Questions - COMPACT A 10 RCF
What is the power rating of the COMPACT A 10?
The COMPACT A 10 delivers 500 W RMS through a Class-D amplifier, with a peak power of 1000 W.
How do I connect a microphone to the COMPACT A 10?
Use the combo XLR/Jack input. Set the Mic/Line selector to 'Mic' and adjust the volume control to the desired level.
Can I use the COMPACT A 10 as a floor monitor?
Yes, the enclosure has a 45° monitor angle so it can be placed on the floor and used as a wedge monitor.
How do I mount the speaker on a tripod stand?
Insert the 36 mm pole of a standard speaker stand into the pole mount on the bottom of the enclosure. Ensure the stand is rated for the weight.
What cleaning products are safe for the enclosure?
Use a soft dry cloth to clean the outer surface. Avoid water, solvents, or abrasive cleaners that may damage the polypropylene finish.
Does the speaker have a built-in mixer?
It has a dedicated input section with two combo inputs, each with its own volume control. However, it is not a full mixer; for more channels, use an external mixer.
What is the maximum SPL?
The maximum sound pressure level is 125 dB peak, measured at 1 meter.
Is it possible to daisy-chain multiple speakers?
Yes, use the XLR link output to connect the first speaker to the input of a second speaker. This allows you to create a daisy-chain without a mixer.
What are the protection features of the amplifier?
The amplifier includes thermal protection, short-circuit protection, and limiter to prevent distortion and damage to the speakers.
How do I update the DSP firmware?
The COMPACT A 10 does not have user-upgradeable DSP firmware. If a firmware update is needed, contact RCF authorized service centers.
User questions about COMPACT A 10 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual COMPACT A 10 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COMPACT A 10 by RCF.