HL 2260 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free HL 2260 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | RCF |
| Model | HL 2260 |
| Product type | Professional 2-way passive loudspeaker |
| Woofer | 15-inch neodymium woofer |
| High-frequency driver | 1-inch compression driver with 90° x 60° horn |
| Frequency response | 55 Hz - 20 kHz |
| Power handling (RMS) | 400 W |
| Power handling (peak) | 800 W |
| Impedance | 8 ohms |
| Sensitivity | 97 dB SPL @ 1 m / 1 W |
| Maximum SPL | 126 dB |
| Dispersion | 90° horizontal, 60° vertical |
| Connections | 2 x Neutrik SpeakON NL4 |
| Enclosure material | 15 mm birch plywood with high-resistance black paint |
| Grille | Powder-coated metal grille with acoustic foam |
| Dimensions (H x W x D) | 720 x 440 x 400 mm |
| Weight | 24 kg |
| Flying hardware | M10 rigging points and pole mount socket |
| Maintenance | Clean the grille and enclosure with a soft dry cloth |
| Spare parts | Available via RCF authorized service centers |
Frequently Asked Questions - HL 2260 RCF
What is the recommended amplifier power for the HL 2260?
For optimal performance, use an amplifier delivering 400-800 W per channel at 8 ohms. The speaker has a peak power of 800 W, so ensure the amplifier does not exceed the RMS rating to avoid damage.
How do I connect the HL 2260 to an amplifier?
Use a SpeakON cable from the amplifier to the input connector. The HL 2260 has two SpeakON NL4 connectors. Connect one to the amplifier and the other can be used to link to another speaker.
Can the HL 2260 be used as a floor monitor?
While it is primarily a main PA speaker, its trapezoid shape allows it to be positioned on its side as a monitor. However, for dedicated monitoring, RCF offers specific models.
What is the correct way to clean the loudspeaker?
Unplug the speaker before cleaning. Use a soft, dry cloth on the cabinet and grille. Avoid water or solvents, as they may damage the finish or driver components.
How should I protect the speaker from feedback?
Keep microphones away from the front grille and avoid pointing them directly at the speaker. Use a graphic equalizer to cut frequencies that tend to feed back. Also, maintain proper gain staging.
What type of cables should I use for the HL 2260?
Use high-quality SpeakON cables (NL4). The recommended wire gauge is 2.5 mm² (13 AWG) or thicker for runs up to 30 meters. Ensure the cable is rated for the power output.
Does the HL 2260 come with mounting brackets?
The speaker includes M10 rigging points for flying installations. A pole mount socket is also available for stand mounting. Brackets are not included but can be purchased separately.
Can I use the HL 2260 outdoors?
Yes, but it must be protected from rain and direct moisture. The cabinet is painted, and the grille is coated, but the speaker is not IP-rated. Use a cover or place it under shelter.
What is the frequency range of the HL 2260?
The frequency response is 55 Hz to 20 kHz, with a usable range extending slightly lower depending on the room. For full-range bass, pair with a subwoofer.
What should I do if a driver fails?
Contact RCF authorized service centers for genuine replacement parts. Do not attempt to replace the woofer or compression driver yourself, as it may affect performance and void the warranty.
User questions about HL 2260 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual HL 2260 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL 2260 by RCF.
USER MANUAL HL 2260 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : HL 2260
Category : Loudspeaker