C 5212-94 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free C 5212-94 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Professional loudspeaker |
| Configuration | 2-way passive |
| Woofer size | 12 inches |
| Tweeter size | 1 inch compression driver |
| Frequency response | 55 Hz - 20 kHz |
| Power handling (AES) | 400 W |
| Peak power handling | 800 W |
| Impedance | 8 ohms |
| Sensitivity | 97 dB SPL @ 1 m, 1 W |
| Dispersion | 90° x 60° |
| Connectors | 2 x Speakon NL4 |
| Mounting options | Pole mount, fly points |
| Enclosure material | Plywood with black paint |
| Grille | 1.5 mm steel with acoustical foam |
| Dimensions (W x H x D) | 360 x 580 x 330 mm |
| Net weight | 14.5 kg |
| Safety features | Recessed handles, anti-slip feet |
| Maintenance | Clean with dry cloth, check connections |
| Spare parts and repairability | Available through RCF service network |
Frequently Asked Questions - C 5212-94 RCF
How to connect the loudspeaker to an amplifier?
Use a Speakon cable inserted into the NL4 connector. Ensure correct polarity: pin +1 to amplifier positive, pin -1 to negative. The speaker has 8 ohm impedance, so set the amplifier accordingly.
What is the recommended amplifier power?
The speaker handles 400 W AES and 800 W peak. An amplifier delivering between 400 W and 800 W RMS per channel at 8 ohms is ideal.
What are the physical dimensions and weight?
Dimensions are approximately 360 x 580 x 330 mm (W x H x D). The net weight is 14.5 kg. Always use appropriate stands or brackets.
Can this speaker be used outdoors?
It can be used outdoors only under sheltered conditions. Do not expose the speaker to direct rain or extreme moisture, as the enclosure is not waterproof.
How should I maintain and clean the loudspeaker?
Clean the enclosure and grille with a soft dry cloth. Check and tighten all connections periodically. Avoid abrasive or chemical cleaners.
What type of connectors does it use?
It uses two Speakon NL4 connectors, which allow daisy-chaining multiple speakers. Standard wiring is +1/-1 for the audio signal.
What is the frequency response of this model?
The frequency response covers 55 Hz to 20 kHz, providing a balanced sound for both music and voice applications.
Does it have a built-in crossover?
Yes, it features a passive crossover network that splits the signal between woofer and compression driver, with integrated protection.
Are there any safety precautions for installation?
Always place the speaker on a stable surface or stand. For flying applications, use the rigging points with certified hardware and safety cables. Ensure the stand is rated for the speaker weight.
What is the warranty period?
RCF offers a standard warranty period, usually covering manufacturing defects. Contact your local dealer for specific terms and extend the coverage if needed.
User questions about C 5212-94 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual C 5212-94 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C 5212-94 by RCF.
USER MANUAL C 5212-94 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : C 5212-94
Category : Loudspeaker