UP 2082 - Receiver RCF - Free user manual and instructions
Find the device manual for free UP 2082 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional 2-way passive loudspeaker |
| Brand | RCF |
| Model | UP 2082 |
| Woofer | 8-inch high-excursion woofer |
| Tweeter | 1-inch compression driver |
| Frequency Response | 70 Hz - 20 kHz |
| Sensitivity | 92 dB (1W @ 1m) |
| Maximum SPL | 116 dB peak |
| Power Handling | 200 W continuous, 400 W program |
| Impedance | 8 ohms |
| Enclosure Type | Bass reflex with front port |
| Connectors | 2 x Speakon NL4 |
| Dispersion | 90° H x 60° V |
| Dimensions (H x W x D) | 410 x 244 x 245 mm |
| Weight | 8 kg |
| Mounting | 35 mm pole socket, M8 rigging points |
| Recommended Amplifier | 400 W continuous into 8 ohms |
| Maintenance & Cleaning | Use a soft, dry cloth to wipe the enclosure and grille. Do not use water or solvents. |
| Safety | Place on a stable surface to prevent tipping. Do not expose to rain or excessive moisture. |
| Spare Parts & Repairability | Contact RCF customer service for spare parts and servicing. |
| General Information | Ideal for live sound, installed sound, and portable PA applications. |
Frequently Asked Questions - UP 2082 RCF
How do I connect the RCF UP 2082 to my amplifier?
Use a Speakon NL4 cable from the amplifier output to the speaker's input. Ensure the amplifier is powered off during connection. Match the impedance (8 ohms) and respect the recommended power rating.
What is the best placement for the UP 2082?
Place the speaker on a stable surface or mount it on a pole at least 1 meter from walls to avoid bass reinforcement. For optimal stereo imaging, angle the speakers toward the listening area.
Can I use the UP 2082 as a floor monitor?
Yes, the trapezoidal enclosure allows the speaker to be placed on its side as a floor wedge. Ensure the speaker is angled toward the performer for clear monitoring.
What is the maximum power handling of this speaker?
The UP 2082 handles 200 W continuous and 400 W program. Using an amplifier with higher RMS power may risk damage if overdriven.
How should I clean and maintain the RCF UP 2082?
Remove dust from the enclosure and grille with a soft dry cloth. Never use water, solvents, or compressed air as these may damage the transducers or cabinet.
Are there any safety precautions for using this speaker?
Always place the speaker on a stable, level surface. Check rigging points for secure mounting. Avoid overloading the speaker with excessive volume or distortion.
Can I mount the UP 2082 on a pole or tripod?
Yes, the speaker has a 35 mm pole socket on the bottom. Use a compatible pole stand that can support the weight (8 kg) and ensure the stand is on a firm surface.
What is the impedance of this speaker and why does it matter?
The impedance is 8 ohms. This value affects how much current the amplifier delivers. Make sure your amplifier is rated for 8-ohm operation to avoid overheating.
Does the UP 2082 have a built-in crossover?
Yes, the speaker includes a passive crossover network that splits the audio signal between the woofer and compression driver. No external crossover is needed.
How can I dispose of the packaging?
Recyclable packaging materials such as cardboard and plastic should be disposed of according to local recycling regulations.
User questions about UP 2082 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual UP 2082 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UP 2082 by RCF.
USER MANUAL UP 2082 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : UP 2082
Category : Receiver