AS3237MS-PSA - Sander Mac Tools - Free user manual and instructions
Find the device manual for free AS3237MS-PSA Mac Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Mini Sander |
| Brand | Mac Tools |
| Model | AS3237MS-PSA |
| Disc Size | 2 inches (50 mm) PSA backing pad |
| Free Speed | 18,000 RPM (no load) |
| Air Inlet | 1/4 inch NPT |
| Recommended Air Pressure | 90 PSI (6.2 bar) |
| Air Consumption | 4 CFM (at 90 PSI) |
| Exhaust Direction | Rear exhaust |
| Sound Level | 80 dBA (typical) |
| Vibration Level | 2.5 m/s² (typical) |
| Weight | 0.7 lb (320 g) |
| Length | 6.5 inches (165 mm) |
| Operating Principle | Rotary (for PSA discs) |
| Housing Material | Composite (lightweight) |
| Usage | Automotive bodywork, paint prep, detailing |
| Maintenance | Clean air inlet and lubricate with air tool oil before and after each use |
| Safety Recommendations | Always wear eye protection and a dust mask; disconnect air supply before servicing |
| Spare Parts Availability | Backing pad and replacement parts available through Mac Tools distributor |
| Warranty | Standard Mac Tools warranty applies |
Frequently Asked Questions - AS3237MS-PSA Mac Tools
What is the AS3237MS-PSA sander used for?
It is a pneumatic mini sander designed for automotive bodywork, paint preparation, and detail sanding in tight areas.
What size sanding discs does it use?
It uses PSA (pressure-sensitive adhesive) discs with a 2-inch (50 mm) diameter. Peel off the backing and press onto the pad.
What air pressure is required for optimal operation?
Operate at 90 PSI (6.2 bar) for maximum performance. Use a regulator to maintain a consistent supply.
How do I maintain the sander?
Regularly put 2-3 drops of air tool oil into the air inlet before and after each use. Clean the outer surfaces and ensure the exhaust is not blocked.
Can I use hook-and-loop discs with this sander?
No, the factory backing pad is designed for PSA discs only. You can replace the pad with a hook-and-loop version if available as an accessory.
Is this sander variable speed?
No, the AS3237MS-PSA is a fixed-speed pneumatic sander, with a free speed of about 18,000 RPM. Speed control is done by varying the air pressure.
How do I change the backing pad?
Unscrew the pad retaining screw from the spindle (use the spindle wrench to hold). Remove the old pad and attach the new one, then tighten securely.
What safety gear should I wear?
Always wear safety glasses or goggles, a dust mask, and hearing protection. Do not operate without proper guards in place.
Can this sander be used on wood or plastic?
Yes, it works on wood, metal, fiberglass, and plastic, provided you use the appropriate PSA disc grit.
Why is the sander losing power?
Check the air supply pressure, clean the air filter on the tool, and lubricate the internal mechanism. Ensure the air hose is not too small or restricted.
User questions about AS3237MS-PSA Mac Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual AS3237MS-PSA - Mac Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS3237MS-PSA by Mac Tools.
USER MANUAL AS3237MS-PSA Mac Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mac Tools
Model : AS3237MS-PSA
Category : Sander