AS717 - Sander Mac Tools - Free user manual and instructions
Find the device manual for free AS717 Mac Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Random Orbit Sander |
| Brand | Mac Tools |
| Model | AS717 |
| Power Source | Electric Corded, 120 V AC, 60 Hz |
| Amperage | 2.5 A |
| Orbit Diameter | 3/32 in (2.4 mm) |
| Pad Size | 5 in (125 mm) hook-and-loop |
| Variable Speed | 6,000 to 12,000 OPM |
| Dust Collection | Integrated vacuum adapter, dust bag included |
| Weight | 2.8 lb (1.27 kg) |
| Dimensions (L x W x H) | 8.5 x 5.0 x 5.5 in (21.6 x 12.7 x 14.0 cm) |
| Cord Length | 8 ft (2.4 m) |
| Body Material | Reinforced nylon, overmolded grip |
| Key Features | Low vibration, soft start, lock-on button, dust-sealed switch |
| Included Accessories | 5” sanding discs (assorted grits), dust bag, hex key, storage case |
| Cleaning Instructions | Unplug, wipe with dry cloth; clean vent holes with compressed air |
| Maintenance | Replace pad and dust bag as needed; check carbon brushes every 50 hours |
| Safety | Uses safety glasses; avoid water; disconnect when changing discs |
| Repairability | User-serviceable parts: pad, brushes, switch; contact Mac Tools service center for other repairs |
| Compliance | UL Listed, ETL listed |
Frequently Asked Questions - AS717 Mac Tools
What type of sander is the Mac Tools AS717?
The AS717 is a random orbit sander, ideal for fine finishing and material removal.
How do I attach sanding discs to the AS717?
Place the disc onto the hook-and-loop pad and press firmly. Ensure alignment with pad holes for dust collection.
Can I use the sander for wet sanding?
No, the AS717 is designed for dry sanding only. Using water can cause electrical shock and damage.
How do I change the sanding pad?
Unplug the sander. Remove the existing pad by unscrewing the center screw (hex key included). Attach new pad and tighten.
What is the recommended speed for different materials?
Use high speed (10,000-12,000 OPM) for material removal and low speed (6,000-8,000 OPM) for finishing or delicate surfaces.
How do I clean the dust collection system?
Empty the dust bag regularly. For best performance, tap bag gently and use compressed air to clear the vacuum port and holes in the pad.
Why does my sander vibrate excessively?
Excessive vibration may indicate a worn pad or unbalanced disc. Try a new sanding disc and check pad for wear. If persists, contact service.
Can I use the AS717 with a vacuum cleaner?
Yes, the dust port accepts standard 1-1/4 in (32 mm) vacuum hoses. Connect your shop vac for dust-free operation.
How often should I replace the carbon brushes?
Inspect brushes every 50 hours of use. Replace if shorter than 1/4 in (6 mm). Only use genuine Mac Tools brushes.
Where can I find replacement parts or service?
Contact your local Mac Tools distributor or visit mactools.com. For warranty service, bring to an authorized service center.
User questions about AS717 Mac Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual AS717 - Mac Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS717 by Mac Tools.
USER MANUAL AS717 Mac Tools
The types and specifications may be changed with or without notice.
"WARNING"
- Wear safety goggles when using this tool.
- Make sure RPM rating of accessories equals or exceeds RPM rating tool.
- Make sure fit in rating of disassessed square tool parts.
- Make sure and related tool parts are securely tightened before operating tool.
- Make sure paid related tool parts are accurately in
- Do not put additional pressure on the machine.
- Do not put additional pressure on the machine.
- Continued exposure to vibration may cause injury to your hands and arms.
- Disconnect tool when not in use.