HHG050U - Circuit Breaker HAGER - Free user manual and instructions
Find the device manual for free HHG050U HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circuit Breaker |
| Brand | Hager |
| Model | HHG050U |
| Rated Current | 50 A |
| Number of Poles | 2 |
| Trip Curve | C |
| Rated Voltage | 230/400 V AC |
| Breaking Capacity | 10 kA |
| Insulation Voltage | 440 V |
| Mounting Type | DIN rail |
| Width | 36 mm (2 modules) |
| Height | 85 mm |
| Depth | 60 mm |
| Weight | 0.15 kg |
| Terminal Capacity | 1-25 mm² |
| Protection Degree | IP20 |
| Operating Temperature | -25°C to +55°C |
| Frequency | 50/60 Hz |
| Standard Compliance | EN 60898-1 |
| Mechanical Endurance | 20,000 operations |
| Electrical Endurance | 10,000 operations |
| Maintenance Advice | Periodic visual inspection and terminal tightening |
| Cleaning Advice | Disconnect power and wipe with dry cloth |
| Safety Features | Finger-safe terminals, IP20 protection |
| Repairability | Not repairable; replace the whole unit |
Frequently Asked Questions - HHG050U HAGER
What is the rated current of the Hager HHG050U circuit breaker?
The rated current is 50 A, meaning it can carry 50 amperes continuously without tripping under normal conditions.
What does the trip curve C on the HHG050U mean?
The C trip curve means the breaker trips at 5 to 10 times its rated current, suitable for general-purpose and slightly inductive loads.
How many poles does the HHG050U have?
It has 2 poles, allowing it to disconnect both phase and neutral or two phases simultaneously.
What is the breaking capacity of the HHG050U?
The breaking capacity is 10 kA, meaning it can safely interrupt short-circuit currents up to 10,000 A.
Can the HHG050U be used in a residential distribution board?
Yes, it is designed for DIN rail mounting in residential or commercial distribution boards.
How do I install the HHG050U circuit breaker?
Installation must be done by a qualified electrician. It snaps onto a DIN rail and wires are connected to the screw terminals.
What maintenance does the HHG050U require?
Regularly check that terminal connections are tight and the unit is free from damage. Always disconnect power before inspecting.
How should I clean the circuit breaker?
Disconnect power first, then wipe the surface with a dry cloth. Avoid using liquids or abrasive cleaners.
Is the HHG050U repairable if it fails?
No, it is not user-repairable. If faulty, replace the entire unit with an identical model to ensure safety.
What safety standards does the HHG050U comply with?
It complies with EN 60898-1, the European standard for miniature circuit breakers, ensuring reliable protection and performance.
User questions about HHG050U HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Circuit Breaker in PDF format for free! Find your manual HHG050U - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HHG050U by HAGER.
USER MANUAL HHG050U HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : HHG050U
Category : Circuit Breaker