VTD-M2HET2812 - Security Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-M2HET2812 Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Vitek |
| Model | VTD-M2HET2812 |
| Mounting Type | Wall or ceiling mountable |
| Video Resolution | 1080p Full HD (1920 x 1080) |
| Lens Type | Fixed focal length, 3.6mm |
| Night Vision | IR LEDs with up to 65 ft (20m) range |
| Motion Detection | Built-in PIR motion sensor |
| Weatherproof Rating | IP66 weatherproof housing |
| Power Supply | 12V DC, 5W |
| Power Input | DC 12V adapter (included) |
| Dimensions (W x H x D) | 2.8 x 2.8 x 5.9 inches (70 x 70 x 150 mm) |
| Weight | 1.1 lbs (0.5 kg) |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
| Video Output | Analog HD (HD-TVI/CVBS) via BNC connector |
| Storage | Requires external DVR or NVR (not included) |
| Housing Material | Die-cast aluminum with polycarbonate dome |
| Compliance | CE, RoHS |
| Maintenance | Clean exterior with soft dry cloth; inspect cables periodically |
| Safety Warnings | Do not disassemble; use only approved power supply |
| Spare Parts & Repairability | Use only Vitek approved replacement parts; contact support for repairs |
Frequently Asked Questions - VTD-M2HET2812 Vitek
How do I connect the camera to my DVR?
Use a BNC cable to connect the camera's video output to the DVR's video input. If your DVR supports HD-TVI, the camera will provide a 1080p Full HD signal. Connect the 12V DC power adapter to the camera and plug it into a power outlet.
Why is the night vision not turning on?
The IR LEDs automatically activate in low-light conditions. Ensure the ambient light level is below the trigger threshold. If the camera is in a well-lit area or the IR mode is disabled in the OSD menu, night vision may not engage. Check the sensor lens and make sure it is not blocked.
How do I reset the camera to factory defaults?
Locate the reset button on the camera (often a small pinhole). Press and hold it for about 10 seconds while the camera is powered on. Alternatively, use the OSD menu to select 'Factory Reset' and confirm. The camera will reboot with default settings.
Can this camera work outside?
Yes, the Vitek VTD-M2HET2812 is rated IP66, meaning it is fully protected against dust and powerful water jets. It can withstand rain, snow, and extreme temperatures from -22°F to 122°F, making it suitable for outdoor installation.
What is the maximum distance for IR night vision?
The built-in IR LEDs provide visibility up to 65 feet (20 meters) in complete darkness. The actual effective distance may vary depending on the environment, such as ambient light, reflective objects, and weather conditions.
How do I clean the camera lens?
To avoid scratches, use a soft, lint-free cloth slightly dampened with water or a mild lens cleaner. Gently wipe the lens surface. Do not use abrasive materials or harsh chemicals, and always clean the housing separately to prevent dirt from scratching the lens.
What should I do if there is no video signal?
Check that the BNC cable is securely connected to both the camera and the DVR. Verify the camera is receiving 12V DC power (LED indicator should be on). Ensure the DVR input channel is set to the correct format (e.g., HD-TVI or CVBS) and that the camera is not in OSD menu mode.
Is the camera compatible with all DVRs?
The camera outputs HD-TVI and CVBS signals, so it works with DVRs that support either format. Older DVRs may only support CVBS, yielding lower resolution. For full 1080p HD, use a DVR with HD-TVI input. It is not an IP camera, so it cannot connect directly to an NVR without a converter.
How can I mount the camera properly?
Use the included mounting bracket and screws. Mark the pilot holes, drill them, and anchor the bracket securely. Position the camera to cover the desired area, then tighten the adjustment knobs to set the angle. For outdoor use, seal the cable entry point with silicone to prevent water ingress.
What power supply does the camera need?
The camera requires a 12V DC power supply with a minimum of 500mA (5W). An adapter is included in the box. Do not use higher voltage or AC power, as it may damage the camera.
User questions about VTD-M2HET2812 Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VTD-M2HET2812 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-M2HET2812 by Vitek.
USER MANUAL VTD-M2HET2812 Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VTD-M2HET2812
Category : Security Camera