VTD-MVS-L35 - Security Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-MVS-L35 Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vitek |
| Model | VTD-MVS-L35 |
| Product Type | HD analog security camera |
| Video Resolution | 1920 x 1080 (1080p) at up to 30fps |
| Image Sensor | 1/2.7-inch CMOS |
| Lens | Fixed 3.6mm lens, F1.6 |
| Night Vision | IR LEDs with 30m range |
| Day/Night Mode | Automatic ICR filter switching |
| Video Output | CVBS / AHD / TVI / CVI switchable |
| Protection | IP66 weatherproof and vandal-proof housing |
| Power | DC 12V, 500mA |
| Dimensions (W x H x D) | 160 x 75 x 75 mm |
| Weight | 0.85 kg |
| Operating Temperature | -30°C to +60°C |
| Mounting | Wall or ceiling mountable |
| Main Functions | Motion detection, privacy masking, mirror, digital zoom |
| Maintenance | Clean lens with soft dry cloth; inspect cable connections |
| Safety Equipment | Low-voltage operation; short-circuit protection |
| Repairability | Spare parts and firmware available via Vitek service centers |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - VTD-MVS-L35 Vitek
How to install the Vitek VTD-MVS-L35 security camera?
Mount the bracket to the wall or ceiling, then attach the camera. Connect the power adapter and video cable, then adjust the camera using the pan/tilt mechanism. Ensure the lens is pointed at the area you wish to monitor.
What power supply is required for this camera?
The camera operates on 12V DC with a consumption of about 500mA. Use a regulated power adapter to avoid damage from voltage fluctuations.
How to connect the camera to a DVR?
Connect the camera's BNC connector to an available channel on your DVR using a coaxial cable. Power the camera, then enter the DVR menu to match the video format (AHD/TVI/CVI/CVBS) to the camera's output switch.
Can this camera be used outdoors?
Yes, the VTD-MVS-L35 has an IP66 weatherproof rating, making it resistant to rain and dust. It also operates in temperatures from -30°C to +60°C.
How do I adjust the viewing angle?
Loosen the side screw on the mounting bracket, tilt or rotate the camera to the desired angle, then tighten the screw. The camera supports manual pan and tilt.
What is the night vision range?
The built-in IR LEDs provide a range of up to 30 meters in total darkness, ensuring clear black-and-white images during the night.
Why is there no video signal and how to troubleshoot it?
Check that the power LED is on, the video cable is properly connected, and the DVR's channel settings match the camera's output mode. Try switching the video output to a different mode using the small button near the cable.
How to clean and maintain the camera?
Use a soft, dry cloth to gently wipe the lens and housing. Do not use abrasive cleaners or liquids. Periodically check the wiring for corrosion or loose connections, especially after storms.
Is the camera weatherproof and suitable for wet locations?
With an IP66 rating, it is fully protected against water jets and heavy rain, so it is suitable for eave or pole mounting exposed to the elements.
What should I do if the IR LEDs are not working at night?
First, ensure the camera is switched to night mode and that there is no bright light near the photodiode. If the IR still fails, the LEDs may be defective; contact Vitek support to arrange repair or replacement under warranty.
User questions about VTD-MVS-L35 Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VTD-MVS-L35 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-MVS-L35 by Vitek.
USER MANUAL VTD-MVS-L35 Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VTD-MVS-L35
Category : Security Camera