VTD-MV2NZ - Security Camera Vitek - Free user manual and instructions
Find the device manual for free VTD-MV2NZ Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security camera |
| Brand | Vitek |
| Model | VTD-MV2NZ |
| Image Sensor | 1/2.8 inch progressive scan CMOS |
| Resolution | 2 Megapixels (1920 x 1080) |
| Lens Type | Fixed focal lens |
| Night Vision | Built-in infrared LED array |
| Video Compression | H.264 / H.265 |
| Connectivity | Wired Ethernet (RJ45) |
| Power Supply | Power over Ethernet (PoE) 802.3af |
| Operating Temperature | -10°C to 50°C |
| Dimensions | 11.6 x 9.0 x 9.0 cm |
| Weight | 0.65 kg |
| Housing | Vandal-resistant metal dome |
| Protection Class | IP67 weatherproof |
| Mounting Options | Ceiling or wall bracket |
| Storage | MicroSD card slot up to 256 GB |
| Remote Access | Web browser and mobile app |
| Security Features | Password protection, encryption |
| Maintenance | Clean the housing with a soft, dry cloth. |
| Cleaning | Do not use solvents or abrasive cleaners on the lens. |
| Spare Parts | Lenses, LED boards and gaskets are available. |
| Repairability | Modular components can be serviced individually. |
Frequently Asked Questions - VTD-MV2NZ Vitek
How do I reset the Vitek VTD-MV2NZ to factory defaults?
Press and hold the reset button for about 10 seconds while the camera is powered on. The camera will reboot and restore the default factory settings.
Which mobile app is compatible with this security camera?
Use the Vitek mobile app available for iOS and Android. Launch the app, scan the camera QR code and follow the connection wizard.
Can the VTD-MV2NZ be installed outdoors?
Yes, the camera has an IP67 weatherproof housing and a vandal-resistant metal dome, making it suitable for outdoor use.
How do I connect the camera to my network?
Connect an Ethernet cable from the camera to your router or PoE switch. Then assign an IP address using the network setup tool or DHCP.
Does the camera support microSD recording?
Yes, the VTD-MV2NZ has a MicroSD card slot that supports cards up to 256 GB for local recording and backup.
How can I improve the night vision quality?
Keep the front glass clean and avoid objects reflecting infrared light. Make sure the camera is not pointed at bright light sources.
What should I do if the camera stops responding?
Power cycle the device, check the network connection, and verify the PoE voltage. If the problem persists, reset the camera to factory defaults.
How do I safely clean the lens?
Use a soft, dry microfiber cloth to wipe the lens gently. Do not spray liquid directly onto the camera.
Can I buy spare parts for the VTD-MV2NZ?
Yes, lenses, LED boards and sealing gaskets are available from authorised Vitek service centers.
What video settings give the best image quality?
Set resolution to 1920 x 1080, enable H.265 compression, and adjust the bitrate between 4-6 Mbps for crisp recordings.
User questions about VTD-MV2NZ Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VTD-MV2NZ - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTD-MV2NZ by Vitek.
USER MANUAL VTD-MV2NZ Vitek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vitek
Model : VTD-MV2NZ
Category : Security Camera