SS048A-616 - Loudspeaker AKAI - Free user manual and instructions
Find the device manual for free SS048A-616 AKAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Bookshelf loudspeaker |
| Brand | AKAI |
| Model | SS048A-616 |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 88 dB (1W/1m) |
| Power Handling | 50 W RMS / 100 W peak |
| Driver Configuration | 6.5-inch woofer and 1-inch tweeter |
| Enclosure Type | Bass reflex with front-firing port |
| Dimensions (W x H x D) | 200 x 330 x 250 mm |
| Weight | 4.5 kg per speaker |
| Connectivity | Push-type speaker terminals |
| Recommended Amplifier Power | 20 - 100 W per channel |
| Crossover Frequency | 3 kHz |
| Placement | Bookshelf or speaker stand |
| Cabinet Finish | Black wood-grain vinyl |
| Cleaning | Use a soft, dry cloth; avoid liquids and aerosols |
| Safety | Keep away from moisture and heat sources |
| Spare Parts and Repairability | Contact AKAI authorized service centers |
| Warranty | Standard manufacturer warranty included |
Frequently Asked Questions - SS048A-616 AKAI
How do I connect the AKAI SS048A-616 speakers to my amplifier?
Use standard speaker wire. Strip about 10 mm of insulation, press the push-type terminal on the back, insert the wire, and release the terminal. Ensure positive (+) and negative (-) connections match on both amplifier and speaker.
What is the maximum power handling of these speakers?
The AKAI SS048A-616 handles up to 50 W RMS and 100 W peak. Exceeding this may cause driver damage.
Can I use these speakers as surround speakers in a home theater setup?
Yes, their 8-ohm impedance and 88 dB sensitivity make them compatible with most AV receivers. Use a small stand or wall bracket if needed.
What gauge of speaker wire should I use?
For runs up to 8 meters, use 16-gauge (1.5 mm²) wire. For longer distances, use 14-gauge (2.5 mm²) to minimize signal loss.
How should I clean and maintain the speakers?
Wipe the cabinet with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the grille fabric dust-free with a vacuum brush attachment.
Are the speaker drivers magnetically shielded?
This model is not specifically listed as magnetically shielded. If placed near a CRT TV or sensitive equipment, we recommend keeping a distance of at least 50 cm.
Can I bi-wire or bi-amp the SS048A-616?
No. The speaker has a single set of push terminals, so it supports only standard single-wire connection. Bi-wiring would require modification and is not recommended.
What is the impedance of the speaker?
The impedance is 8 ohms, which is standard for most home amplifiers and AV receivers. Check your amplifier's output range to ensure compatibility.
Does the speaker come with a user manual?
Yes, a printed user manual is included in the box. You can also download a PDF version from the official AKAI website or manual libraries.
Where can I find spare parts or service for this speaker?
Contact AKAI's official customer support or an authorized service center. Provide the model number SS048A-616 to get the correct parts or repair assistance.
User questions about SS048A-616 AKAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SS048A-616 - AKAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SS048A-616 by AKAI.
USER MANUAL SS048A-616 AKAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AKAI
Model : SS048A-616
Category : Loudspeaker