ZLUM90BS - Range hood Zephyr - Free user manual and instructions
Find the device manual for free ZLUM90BS Zephyr in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Zephyr |
| Model | ZLUM90BS |
| Width | 90 cm |
| Height | 60 cm (adjustable) |
| Depth | 50 cm |
| Weight | 25 kg |
| Power supply | 220-240 V, 50 Hz |
| Motor power | 320 W |
| Lighting | 2 LEDs of 2.5 W |
| Filtration type | Stainless steel grease filters, optional activated carbon filter |
| Controls | Touch screen |
| Maximum airflow rate | 600 m³/h |
| Noise level | 45 to 65 dB(A) |
| Installation | Wall-mounted |
| Exhaust duct diameter | 150 mm |
| Care and cleaning | Dishwasher-safe filters; clean the stainless steel surface with a soft cloth |
| Safety | Automatic shut-off, overheating protection |
| Spare parts and repairability | Spare parts available; activated carbon filter (ref. Z0F-C002) |
| General information | 2-year warranty |
Frequently Asked Questions - ZLUM90BS Zephyr
What is the recommended installation height for this range hood?
The recommended height between the cooktop and the bottom of the hood is 65 to 75 cm for an electric cooktop and 75 to 85 cm for a gas cooktop. Refer to the manual for precise measurements.
How do I install the hood above my stove?
For a wall-mounted installation, mark the location of the wall brackets while respecting the recommended height. Use wall anchors appropriate for the wall type. Connect the exhaust duct before permanently fixing the hood. Make sure the hood is level and securely attached.
How do I clean the grease filters?
The grease filters are removable and dishwasher safe at low temperature. Let them air dry before reinstalling them. Regular cleaning every 4 to 6 weeks is recommended to maintain the efficiency of the hood.
How do I replace the activated carbon filter?
For recirculation mode, the activated carbon filter should be replaced approximately every 3 to 6 months depending on use. Unclip the grease filters, insert the carbon filter behind, then put the grease filters back. Compatible reference: Z0F-C002.
How do I adjust the extraction speed?
The hood has a touch screen with multiple speeds. Press the speed button to increase or decrease the airflow. An indicator light shows the selected speed. Use a high speed for heavy smoke and a low speed for everyday cooking.
Can I use the hood without external exhaust?
Yes, the hood can operate in recirculation mode. An optional activated carbon filter must be added. The air is filtered and then returned to the room. This mode is ideal if you cannot install an exhaust duct.
What should I do if the indicator lights flash?
If the indicator lights flash, it may indicate a filter fault or a blocked motor. Check that the filters are clean and properly installed. If the problem persists, contact Zephyr customer service.
How do I change the LED bulb?
The hood uses integrated LEDs that are not individually replaceable. In case of failure, contact customer service to get the complete lighting module. Turn off the hood and unplug it before any intervention.
Is the hood noisy?
The noise level varies from 45 dB(A) at minimum speed to 65 dB(A) at maximum speed. These values are similar to those of hoods in this category. Regular maintenance reduces noise levels.
Where can I find spare parts for this hood?
Spare parts such as filters, the LED module or the motor are available on notice-facile.com or from Zephyr customer service. Always use genuine parts to ensure safety and performance.
User questions about ZLUM90BS Zephyr
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ZLUM90BS - Zephyr and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZLUM90BS by Zephyr.