ZOME36AS - Range hood Zephyr - Free user manual and instructions
Find the device manual for free ZOME36AS Zephyr in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Range hood |
| Brand | Zephyr |
| Model | ZOME36AS |
| Width | 36 inches (91.4 cm) |
| Depth | 20 inches (50.8 cm) |
| Height | 6 inches (15.2 cm) |
| Weight | 45 lbs (20.4 kg) |
| Airflow capacity | 400 CFM (cubic feet per minute) |
| Maximum noise level | 65 dB |
| Number of speeds | 3 |
| Lighting | 2 x 12W LED lights |
| Controls | Electronic push-button |
| Filter type | Reusable aluminum mesh |
| Duct size | 6 inches round |
| Duct direction | Top or rear exhaust |
| Power supply | 120V / 60Hz |
| Installation type | Under-cabinet |
| Material | Brushed stainless steel |
| Safety certification | cULus listed |
| Maintenance | Clean filters monthly with warm soapy water |
| Spare parts | Filters and LED lights available from authorized dealers |
| Repairability | Modular design with accessible components |
Frequently Asked Questions - ZOME36AS Zephyr
How do I install the Zephyr ZOME36AS range hood?
Installing the ZOME36AS requires a 36-inch gap above your cooktop. Secure the hood to the cabinet above using the included mounting screws, then connect the 6-inch duct to the exhaust outlet. Ensure the unit is level before tightening. Detailed instructions are in the manual.
How often should I clean the filters?
For optimal performance, clean the aluminum mesh filters every month. Soak them in warm soapy water, rinse thoroughly, and let them dry completely before reinstalling. A dishwasher may be used with caution.
How do I replace the LED light?
First, turn off power to the hood. Gently pry out the old LED light module with a flat screwdriver. Disconnect the wire harness, plug in the new light, and press it back into place. Ensure the connection is secure before restoring power.
What is the recommended duct size?
This range hood requires a 6-inch round duct for proper exhaust. Using a smaller duct reduces airflow and increases noise. Keep the duct run as short and straight as possible, with minimal bends.
Why is my range hood noisy?
Noise often comes from loose duct connections, vibrations against cabinets, or a damaged blower wheel. Check that all mounting screws are tight and rubber gaskets are in place. Clean the blower wheel if visible debris is present.
How do I reset the control panel?
If the control panel becomes unresponsive, turn off the hood and disconnect power for 30 seconds. Plug it back in and power on. This resets the electronic controls. For persistent issues, consult a certified technician.
Can I use this hood without ducting (recirculating)?
The ZOME36AS is designed for ducted installation only. For recirculating use, you would need a separate recirculation kit with carbon filters, which is not included. Check with Zephyr for compatible accessories.
What type of electrical connection is required?
The hood requires a 120V, 60Hz grounded outlet. It draws approximately 1.5 amps. Avoid using extension cords. If the cord is damaged, replace it with an identical part from the manufacturer.
Does this hood come with a warranty?
Zephyr offers a limited 1-year parts and labor warranty on the ZOME36AS. The LED lights have a separate 3-year warranty. Register your product on the Zephyr website to activate coverage.
How do I adjust the fan speed?
Use the push-button controls on the front panel. Press 'Power' to turn on, then press 'Speed' to cycle through the 3 levels. The selected speed will light up. Press 'Power' again to turn off.
User questions about ZOME36AS Zephyr
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ZOME36AS - Zephyr and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZOME36AS by Zephyr.