ME-800-C - Loudspeaker KLIPSCH - Free user manual and instructions
Find the device manual for free ME-800-C KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling loudspeaker |
| Brand | Klipsch |
| Model | ME-800-C |
| Speaker Type | 2-way system with 8 inch woofer and 1 inch tweeter |
| Woofer | 8 inch (203 mm) |
| Tweeter | 1 inch (25 mm) |
| Frequency Response | 50 Hz - 20 kHz |
| Crossover Frequency | 2.5 kHz |
| Impedance | 8 ohms |
| Power Handling | 75 W RMS continuous, 150 W peak |
| Sensitivity | 90 dB @ 1 W/1 m |
| Recommended Amplifier Power | 10 - 100 W RMS |
| Mounting Type | Flush ceiling mount |
| Cut-Out Diameter | 208 mm (8.18 in) |
| Overall Diameter | 234 mm (9.21 in) |
| Mounting Depth | 102 mm (4.02 in) |
| Weight | 1.9 kg (4.2 lb) |
| Grille | Paintable white grille included |
| Terminals | Spring-loaded push terminals |
| Usage | Indoor home theater and distributed audio |
| Maintenance | Clean grille with a soft, dry cloth |
| Safety | Turn off amplifier before wiring, ensure secure ceiling mounting |
| Spare Parts | Replacement grille and driver available from Klipsch |
| Documentation | Free PDF manual on Notice-Facile |
Frequently Asked Questions - ME-800-C KLIPSCH
What kind of speaker is the Klipsch ME-800-C?
The Klipsch ME-800-C is a 2-way in-ceiling loudspeaker designed for distributed audio and home theater installations. It combines an 8-inch woofer and 1-inch tweeter for clear sound reproduction.
How do I install the ME-800-C in a ceiling?
Use the cut-out dimensions, trace the opening, cut the hole, route speaker wire, connect the spring-loaded terminals, slide the speaker into the hole, and tighten the mounting clamps. Make sure the ceiling can support the speaker weight.
What amplifier power is recommended for the ME-800-C?
A 10 to 100 watt RMS amplifier is recommended. The speaker handles 75 watts continuous and 150 watts peak, and has a sensitivity of 90 dB, so moderate power is sufficient for most rooms.
Does the Klipsch ME-800-C support Bluetooth?
No, the ME-800-C is a passive loudspeaker and does not include Bluetooth or wireless connectivity. It must be connected to an amplifier or receiver with speaker wire.
What is the impedance of the ME-800-C?
The speaker has a nominal impedance of 8 ohms, making it compatible with most standard home theater receivers and stereo amplifiers.
How should I clean the grille and speaker?
Use a soft, dry cloth to gently wipe the grille. Do not use water, solvents, or abrasive cleaners, as they may damage the finish or driver components.
Can I paint the ME-800-C grille to match my ceiling?
Yes, the included grille is paintable. Remove the grille, apply thin coats of standard paint, and allow complete drying before reinstalling to avoid clogging the perforations.
What safety precautions should I follow during installation?
Always turn off the amplifier before connecting wires. Confirm that the ceiling area is free of electrical cables and plumbing, and ensure the speaker is firmly anchored to withstand vibration over time.
Where can I download the user manual for the ME-800-C?
The free PDF manual can be downloaded from Notice-Facile.com. You can also ask an AI question about the device directly on the manual page.
Are spare parts available for the ME-800-C?
Replacement parts such as grilles, drivers, and crossover components may be available through Klipsch spare parts. Contact an authorized distributor for compatibility and ordering.
User questions about ME-800-C KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ME-800-C - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ME-800-C by KLIPSCH.