WC-24 - Loudspeaker KLIPSCH - Free user manual and instructions
Find the device manual for free WC-24 KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Subwoofer |
| Brand | Klipsch |
| Model | WC-24 |
| Dimensions (H x W x D) | 14.5 x 12.5 x 14.5 inches |
| Weight | 26 lbs |
| Power Output | 300 watts RMS |
| Frequency Response | 25Hz - 125Hz |
| Driver | 12-inch Cerametallic cone |
| Amplifier | Class D |
| Connectivity | Wireless (2.4 GHz) |
| Inputs | Line-level/LFE RCA |
| Wireless Range | Up to 50 feet |
| Enclosure Type | Bass-reflex with rear-firing port |
| Power Supply | 120V ~ 60Hz (internal) |
| Standby Power | Auto on/off |
| Compatibility | Klipsch Wireless Subwoofer Kit (WA-2) |
| Placement | Floor-standing, front or corner |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Safety | Do not expose to moisture; unplug during storms |
| Spare Parts Availability | Contact Klipsch customer service |
| Warranty | 5 years limited |
Frequently Asked Questions - WC-24 KLIPSCH
How do I pair the WC-24 subwoofer with a speaker?
The WC-24 pairs wirelessly with compatible Klipsch speakers using the WA-2 Wireless Subwoofer Kit. Ensure both transmitter and subwoofer are in pairing mode (press and hold ID button until LED blinks). They will sync automatically within range.
What is the frequency response of the WC-24?
The frequency response of the Klipsch WC-24 is 25Hz - 125Hz in standard mode, delivering deep bass for home theater.
Can I place the subwoofer on a shelf?
No, the WC-24 is designed for floor placement only. It has a down-firing or rear-firing port and can cause vibration on shelves. Place it on a solid, level surface.
How do I clean my WC-24 subwoofer?
Use a dry, lint-free cloth to wipe the cabinet. Do not use liquid cleaners or abrasives. Avoid spraying anything directly onto the speaker.
What should I do if the subwoofer does not power on?
Check the power cord connection and ensure the power switch is on. If still off, try a different outlet. If using auto-on, ensure a signal is present. Contact Klipsch support if issue persists.
Does the WC-24 have a built-in amplifier?
Yes, the WC-24 has a built-in Class D amplifier delivering 300 watts RMS (peak power may be higher). It requires no external amp.
Is the WC-24 compatible with my existing Klipsch speaker system?
The WC-24 is compatible with any Klipsch system that uses the WA-2 wireless kit. Check your speaker manual or contact Klipsch for specific compatibility.
Can I use multiple WC-24 subwoofers together?
Yes, you can pair multiple WC-24 subwoofers with a single WA-2 transmitter (if supported) for enhanced bass. Each sub must be paired separately.
What are the dimensions of the WC-24?
The WC-24 measures approximately 14.5 x 12.5 x 14.5 inches (HxWxD) and weighs about 26 lbs. Verify exact specs via Klipsch.
How do I reset my WC-24 subwoofer?
To reset, unplug the subwoofer for 30 seconds, then plug back in. For wireless reset, press and hold the ID button for 10 seconds until LED blinks rapidly.
User questions about WC-24 KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual WC-24 - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WC-24 by KLIPSCH.
USER MANUAL WC-24 KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : WC-24
Category : Loudspeaker