CS-652-W - Loudspeaker KLIPSCH - Free user manual and instructions
Find the device manual for free CS-652-W KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Wall Loudspeaker |
| Brand | Klipsch |
| Model | CS-652-W |
| Speaker Type | 2-Way |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Impedance | 8 ohms |
| Power Handling (RMS) | 50 Watts |
| Power Handling (Peak) | 100 Watts |
| Recommended Amplifier Power | 10 - 100 Watts per channel |
| Dimensions (H x W x D) | 9.5 x 7.5 x 3.5 inches |
| Cutout Dimensions | 8.25 x 6.25 inches |
| Mounting Depth | 3.25 inches |
| Weight | 5 lbs |
| Color | White |
| Grille | Painted, paintable |
| Installation Type | In-wall, with dogleg clamps |
| Enclosure Type | Sealed (in-wall) |
| Crossover Frequency | 2.2 kHz |
| Warranty | Limited Lifetime |
| Cleaning Instructions | Wipe gently with dry cloth; do not use liquids or cleaners. |
| Safety Precautions | Ensure proper mounting; avoid contact with electrical wires. |
| Spare Parts & Repairability | Not user-serviceable; contact Klipsch support for service. |
| General Information | Premium in-wall speaker with Tractrix horn technology for clear sound. |
Frequently Asked Questions - CS-652-W KLIPSCH
How do I install the Klipsch CS-652-W in-wall speaker?
Use the included template to mark the cutout. Cut the drywall, run speaker wire through the hole, connect to the speaker terminals, insert the speaker, and tighten the dogleg clamps with a screwdriver.
What is the recommended amplifier power for this speaker?
Klipsch recommends an amplifier with 10 to 100 watts per channel for optimal performance.
Can I paint the grille to match my wall?
Yes, the grille is paintable. Remove the grille, apply thin coats of spray paint designed for speaker grilles, and let dry completely before reinstalling.
What is the impedance of the CS-652-W?
The speaker has an 8-ohm impedance, compatible with most home theater receivers and amplifiers.
Does the speaker need a back box?
The speaker is designed for in-wall use without an enclosures. However, using a back box can improve sound quality and reduce sound transfer between rooms.
How do I clean the speaker?
Wipe the grille and frame gently with a dry, soft cloth. Do not use water, cleaners, or abrasive materials.
What is the frequency response of this speaker?
The frequency response is 55 Hz to 20 kHz, providing clear highs and solid bass for an in-wall speaker.
Can I use this speaker outdoors?
No, the CS-652-W is designed for indoor use only in drywall or ceiling installations. It is not weather-resistant.
How do I wire the speaker correctly?
Connect the positive terminal (red) to the amplifier's positive output and negative (black) to negative. Ensure proper polarity for optimal sound.
What should I do if there is no sound from the speaker?
Check amplifier connections, speaker wire continuity, and volume settings. Ensure the speaker switch or A/B selection is correct. If still no sound, contact Klipsch support.
User questions about CS-652-W KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CS-652-W - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS-652-W by KLIPSCH.
USER MANUAL CS-652-W KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : CS-652-W
Category : Loudspeaker