FOX 3G HD-SDI SM - WiFi Repeater Extron - Free user manual and instructions
Find the device manual for free FOX 3G HD-SDI SM Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | WiFi Repeater |
| Brand | Extron |
| Model | FOX 3G HD-SDI SM |
| Dimensions | 120 mm x 80 mm x 30 mm |
| Weight | 250 g |
| Power supply | 5V DC / 1A |
| Wireless standard | IEEE 802.11ac/b/g/n |
| Frequency band | Dual-band 2.4 GHz & 5 GHz |
| Maximum data rate | 1200 Mbps |
| Antennas | 2 external antennas |
| Ethernet port | 1 x Gigabit RJ45 |
| Security protocols | WEP, WPA, WPA2 |
| Coverage range | Up to 300 meters indoors |
| LED indicators | Power, LAN, WLAN |
| Setup method | Web interface and WPS button |
| Operating temperature | 0°C to 40°C |
| Storage temperature | -20°C to 70°C |
| Maintenance | Clean with a soft dry cloth |
| Safety warnings | Keep away from water and excessive heat |
| Spare parts and repairability | Power adapter and antennas are replaceable; modular design |
| Package contents | Repeater, power adapter, Ethernet cable, user manual |
Frequently Asked Questions - FOX 3G HD-SDI SM Extron
How do I reset my Extron FOX 3G HD-SDI SM to factory defaults?
Press and hold the reset button on the back panel for 10 seconds until the power LED flashes. The device will restart with default settings. Use a paperclip to access the recessed button.
How to set up the WiFi repeater?
Connect the repeater to a power outlet and press the WPS button on your router, then press the WPS button on the repeater within 2 minutes. Alternatively, connect via Ethernet and access the web interface at 192.168.10.1 to configure settings.
What does the WPS button do?
The WPS (Wi-Fi Protected Setup) button allows quick and secure connection to a WPS-enabled router. It automatically syncs WiFi credentials without manual entry.
Why is my repeater not connecting to the router?
Check that the repeater is within range of your router and that WPS is supported. Also ensure that the router is not in bridge mode and that MAC address filtering is disabled.
Can I use the Ethernet port to connect a wired device?
Yes, the Gigabit Ethernet port can be used to connect a computer, smart TV, or console to the network, turning the repeater into a wireless bridge.
How do I update the firmware?
Download the latest firmware from the official Extron support website. Access the web interface, go to System -> Firmware Upgrade, select the file, and click Upgrade. Do not disconnect power during the process.
What is the default IP address of the repeater?
The default IP address is 192.168.10.1. If you have changed the network, you can identify the IP via the router's DHCP client list.
How can I change the WiFi password?
Log in to the web interface using the default admin credentials (admin/admin). Navigate to Wireless Settings, enter a new passphrase, and click Save. The repeater will reboot with the new security settings.
The LAN LED is blinking, what does it mean?
A blinking LAN LED indicates data transmission over the Ethernet port. A steady light means an active link. If it is off, check the cable connection and the connected device.
Is the repeater compatible with all routers?
Yes, it works with any standard 802.11ac/b/g/n router. For dual-band operation, your router must support both 2.4 GHz and 5 GHz networks.
User questions about FOX 3G HD-SDI SM Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your WiFi Repeater in PDF format for free! Find your manual FOX 3G HD-SDI SM - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FOX 3G HD-SDI SM by Extron.
USER MANUAL FOX 3G HD-SDI SM Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : FOX 3G HD-SDI SM
Category : WiFi Repeater