NAV 10SD 501 - Audio/video converter Extron - Free user manual and instructions
Find the device manual for free NAV 10SD 501 Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network AV encoder/decoder |
| Brand | Extron |
| Model | NAV 10SD 501 |
| Device category | Audio/video converter |
| Video input | One SDI input (3G-SDI, HD-SDI, SD-SDI) |
| Video output | One SDI loop-through output |
| Network connection | 10/100/1000 Mbps Ethernet port |
| Streaming protocols | Extron NAV protocol, RTP/IP |
| Audio support | Embedded SDI audio (2 channels, 48 kHz) |
| Resolution support | Up to 1080p60 (3G-SDI) |
| Control interface | USB mini port for configuration |
| LED indicators | Power, network, video signal status |
| Power supply | 12V DC, 10W (typical) |
| Dimensions | 9.4 cm x 14.5 cm x 2.8 cm (approx.) |
| Weight | 0.3 kg (approx.) |
| Mounting | Rack-mountable with optional bracket, or desktop |
| Operating temperature | 0°C to 45°C |
| Maintenance and cleaning | Use a soft, dry cloth; avoid liquids |
| Safety certifications | CE, UL listed |
| Repairability | No user-serviceable parts; contact qualified service personnel |
Frequently Asked Questions - NAV 10SD 501 Extron
How do I connect the NAV 10SD 501 to my network?
Connect the Ethernet port to a 1000BASE-T switch using a standard Cat5e or higher cable. The device will attempt to obtain an IP address via DHCP. Use the Extron NAVigator or PVX software for discovery and configuration.
Does the NAV 10SD 501 support 4K video?
No, the NAV 10SD 501 is designed for 3G-SDI signals up to 1080p60. For 4K over IP, consider the NAV 10HD series.
What is the latency of this converter?
The NAV 10SD 501 features low latency as low as 1 frame when used with compatible NAV endpoints. Actual latency depends on network conditions.
Can I loop through the SDI signal?
Yes, the device includes an SDI loop-through output that passes the input signal without processing, ideal for daisy-chaining.
How do I perform a factory reset?
Press and hold the Reset button on the front panel for 5 seconds. This restores factory defaults including network settings. Refer to the manual for details.
Is the audio embedded in the SDI signal transmitted over IP?
Yes, the NAV 10SD 501 extracts the embedded SDI audio and streams it as part of the AV packets. It supports up to 2 channels of 48 kHz audio.
What power supply is required?
Use the supplied 12V DC external power supply. The device consumes 10W typically. Replacing a damaged power supply is possible with Extron PSU-12V.
Can I mount the device on a rack?
Yes, the unit is designed for desktop use and can be mounted using an optional under-desk or rack-mount kit. The compact size fits in any standard rack.
How do I configure the network settings?
Use the Extron PCS (Product Configuration Software) via the USB port or over the network. You can set a static IP, subnet mask, and gateway.
Is the NAV 10SD 501 compatible with other Extron equipment?
It is fully compatible with the NAVigator control system and other NAV series endpoints, allowing seamless distribution of SDI video over IP.
User questions about NAV 10SD 501 Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video converter in PDF format for free! Find your manual NAV 10SD 501 - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NAV 10SD 501 by Extron.
USER MANUAL NAV 10SD 501 Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : NAV 10SD 501
Category : Audio/video converter