EDID 101D - Audio/video converter Extron - Free user manual and instructions
Find the device manual for free EDID 101D Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | EDID Emulator / AV Converter |
| Brand | Extron |
| Model | EDID 101D |
| Dimensions (H x W x D) | 1.7 x 3.5 x 1.0 inches (4.3 x 8.9 x 2.5 cm) |
| Weight | 0.2 lb (90 g) |
| Power Supply | External, 5V DC, 1A |
| Input Connector | DVI-I (digital and analog) |
| Output Connector | DVI-I (loop-through or emulated) |
| EDID Emulation | Yes, with non-volatile memory |
| Supported Resolutions | Up to 1920 x 1200 @ 60 Hz |
| Configuration | DIP switches (8-position) |
| LED Indicators | Power (green), Signal (orange) |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Rack Mountable | No (desktop or surface mount) |
| Mounting | Includes mounting brackets for 1/4 rack width |
| Maintenance | Clean with dry cloth; no liquids |
| Safety | Use only specified power adapter; avoid moisture |
| Spare Parts & Repairability | No user-serviceable parts; contact Extron support |
| Warranty | 3 years (standard Extron warranty) |
Frequently Asked Questions - EDID 101D Extron
What is the purpose of the Extron EDID 101D?
The EDID 101D is an EDID emulator that stores and presents EDID data to a source device, ensuring reliable video/audio handshaking and preventing output loss in AV systems.
How do I configure the EDID 101D?
Configuration is done via DIP switches on the unit. Refer to the user manual for specific switch settings corresponding to different resolutions and EDID data.
Can the EDID 101D be used with HDMI sources?
Yes, the DVI-I connector accepts HDMI signals via an adapter, but only digital video is supported. Audio is not passed through this device.
What power supply is required?
Use the provided 5V DC, 1A external power supply or an equivalent with the correct polarity. Using an incorrect supply may damage the unit.
How do I know if the unit is working?
The Power LED glows green when powered. The Signal LED illuminates orange when a valid video signal is detected on the input.
What resolutions are supported?
The EDID 101D supports resolutions up to 1920x1200 @ 60 Hz. Custom EDID can be programmed via DIP switches or extron software.
Is the EDID 101D hot-swappable?
Yes, you can connect or disconnect cables while the unit is powered. However, always ensure the source and display are properly grounded to avoid damage.
Can I mount the EDID 101D in a rack?
The unit is not rack-mountable by itself but comes with mounting brackets for 1/4 rack width (6.8 inches) desk or under-surface mounting.
What is the operating temperature range?
The device operates reliably between 0°C and 50°C (32°F to 122°F). Avoid exposing it to extreme heat or cold.
How do I reset the EDID 101D to factory defaults?
Set all DIP switches to OFF and power cycle the unit. This loads the default EDID (typically 1024x768). Consult the manual for exact defaults.
User questions about EDID 101D Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video converter in PDF format for free! Find your manual EDID 101D - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EDID 101D by Extron.
USER MANUAL EDID 101D Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : EDID 101D
Category : Audio/video converter