DiNET DAN-TX2 - Processor Radial Engineering - Free user manual and instructions
Find the device manual for free DiNET DAN-TX2 Radial Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 2-channel analog-to-Dante digital audio transmitter |
| Brand | Radial Engineering |
| Model | DiNET DAN-TX2 |
| Audio inputs | 2 × balanced XLR / 1/4" TRS combo jacks |
| Network output | 1 × RJ45 Ethernet (Dante) |
| Audio resolution | 24-bit / 48 kHz or 96 kHz sample rate |
| Power supply | PoE 802.3af via Ethernet cable |
| Input level control | Dual rotary trimmers |
| Ground lift switch | Engages to eliminate hum and buzz |
| Status LED indicators | Power, signal, and network link status |
| Chassis | Heavy-duty 14-gauge steel |
| Mounting options | Desktop with anti-slip rubber feet; optional rack kit |
| Dimensions (H×W×D) | 1.75 × 8.5 × 5.5 inches (44 × 216 × 140 mm) |
| Weight | 1.6 lbs (0.73 kg) |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Safety compliance | CE, FCC Part 15 Class B |
| Maintenance | Clean with soft dry cloth; no internal adjustments |
| Spare parts | Available through Radial authorized service centers |
| Included accessories | Quick start guide, dual rubber foot set |
| Warranty | 3-year limited warranty |
Frequently Asked Questions - DiNET DAN-TX2 Radial Engineering
What is the DiNET DAN-TX2 and what does it do?
It is a 2-channel analog-to-Dante transmitter that converts analog audio signals into a digital Dante network stream.
How do I connect the DAN-TX2 to a Dante network?
Connect an Ethernet cable from the RJ45 output to a PoE-enabled Dante switch or network. The device will then automatically join the network and appear in Dante Controller.
Does the DAN-TX2 require a power supply?
No, it is Power over Ethernet (PoE) powered. Both data and power are supplied through the same Ethernet cable, provided the switch is PoE compliant.
Can I plug a microphone directly into the DAN-TX2?
No, the inputs are line-level inputs designed for mixers, keyboards, or other line-level sources. Microphones require a preamp or a separate mic-to-line converter.
How do I change the sample rate between 48 kHz and 96 kHz?
Use the small push-button switch on the front panel. The current sample rate is indicated by the LED color: green for 48 kHz, red for 96 kHz. Ensure the Dante network is set accordingly.
What type of audio cables should I use with the combo jacks?
You can use either XLR or 1/4" TRS balanced cables; both are supported via the combo jacks, allowing easy connection to a variety of equipment.
Can the DAN-TX2 be mounted in a rack?
Yes, an optional Rack Mount Kit (RK-1) is available to mount two units side by side in a standard 19" rack space.
How do I reset the device or update firmware?
Firmware updates are performed via the Dante Firmware Update Manager over the network. A factory reset is done by holding the sample rate switch for 10 seconds.
Does the ground lift switch help with audio hum?
Yes, the ground lift switch disconnects pin 1 of the XLR input, helping to break ground loops that cause hum and buzz in the audio signal.
Is the DAN-TX2 compatible with other Dante equipment?
Yes, it uses the Dante audio-over-IP protocol and is compatible with any Dante-enabled mixer, speaker, or audio interface from major manufacturers.
User questions about DiNET DAN-TX2 Radial Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual DiNET DAN-TX2 - Radial Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DiNET DAN-TX2 by Radial Engineering.
USER MANUAL DiNET DAN-TX2 Radial Engineering
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Radial Engineering
Model : DiNET DAN-TX2
Category : Processor