PreComp - Audio Equipment Radial Engineering - Free user manual and instructions
Find the device manual for free PreComp Radial Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Compresseur / limiteur stéréophonique professionnel |
| Marque | Radial Engineering |
| Modèle | PreComp |
| Format | Rack 19 pouces, 1U |
| Canaux | 2 canaux stéréo |
| Entrées | XLR et jack TRS 6,35 mméquilibrées |
| Sorties | XLR et jack TRS 6,35 mm équilibrées |
| Alimentation | Alimentation universelle interne 100-240 VAC, 50/60 Hz |
| Consommation électrique | 15 W maximum |
| Réponse en fréquence | 20 Hz à 20 kHz (+/- 0,5 dB) |
| Plage dynamique | Supérieure à 110 dB |
| Distorsion harmonique totale | Inférieure à 0,01 % à +4 dBu |
| Rapport signal/bruit | Supérieur à 90 dB |
| Contrôles | Seuil, ratio, attaque, relâchement, gain de sortie, lien stéréo |
| Indicateurs | DEL de réduction de gain et d'activation |
| Dimensions (L x H x P) | 482,6 x 44,5 x 203,2 mm |
| Poids | 2,7 kg (6 livres) |
| Entretien | Nettoyer avec un chiffon doux et sec; éviter les solvants |
| Sécurité | Mise à la terre via le cordon d'alimentation; ne pas exposer à l'humidité |
| Pièces détachées | Disponibles auprès du fabricant; alimentation remplaçable |
| Réparabilité | Conception modulaire facilitant la réparation par un technicien qualifié |
| Garantie | 3 ans (pièces et main-d'œuvre) |
| Utilisation prévue | Studio d'enregistrement, sonorisation, broadcast |
Frequently Asked Questions - PreComp Radial Engineering
What is the Radial Engineering PreComp?
The PreComp is a professional stereo compressor/limiter designed for studio, live, and broadcast applications. It offers transparent gain reduction with comprehensive controls.
How do I connect the PreComp to my mixer?
Use balanced XLR or TRS cables. Connect the output of your mixer to the inputs of the PreComp, then connect the outputs to your next device (e.g., equalizer, crossover).
What is the power requirement for the PreComp?
The unit has an internal universal power supply that accepts 100-240 VAC, 50/60 Hz. No external transformer is needed.
Can I use the PreComp on a single channel?
Yes, you can use either channel independently. Each channel has its own controls, and the stereo-link switch couples both channels for stereo operation.
What do the attack and release controls do?
Attack controls how quickly the compressor responds to signals above the threshold (from 0.1 ms to 50 ms). Release sets how fast it recovers (from 50 ms to 1.5 s). These shape the dynamic envelope.
How do I set the threshold and ratio?
Start with a low ratio (2:1) and lower the threshold until you see gain reduction of 3-6 dB on peaks. Adjust the ratio higher (up to 20:1) for limiting.
What is the makeup gain for?
Compression reduces overall level. Use makeup gain (up to +20 dB) to restore the output level to match the input.
How do I clean and maintain the PreComp?
Disconnect from power, then wipe the front panel and chassis with a soft dry cloth. Avoid liquids, sprays, and abrasive cleaners. Keep vents unobstructed.
Is the PreComp safe for rack installation?
Yes, it is designed for standard 19-inch racks. Allow 1U of space and ensure adequate ventilation. Use rack screws to secure it firmly.
What should I do if the unit does not power on?
Check the power cord, wall outlet, and the rear panel fuse. If the fuse is blown, replace it with the same rating. If the problem persists, contact Radial support.
User questions about PreComp Radial Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Equipment in PDF format for free! Find your manual PreComp - Radial Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PreComp by Radial Engineering.