Supermicro

SuperServer 1029TP-DC0R - Server Supermicro - Free user manual and instructions

Find the device manual for free SuperServer 1029TP-DC0R Supermicro in PDF.

📄 133 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Supermicro SuperServer 1029TP-DC0R - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Server
Brand Supermicro
Model SuperServer 1029TP-DC0R
Form Factor 1U Rackmount
Processor Support Dual Intel Xeon Scalable (Skylake / Cascade Lake)
Memory Capacity Up to 1.5TB ECC DDR4
Memory Slots 24 DIMM slots
Drive Bays 8x 2.5-inch hot-swap SATA/SAS/NVMe (configuration dependent)
Onboard Storage 8x SATA3 + 4x NVMe ports
Network Dual 10GBase-T Ethernet ports
Remote Management Dedicated IPMI 2.0 LAN port with KVM
Expansion Slots 2x PCIe 3.0 x16 slots
Power Supply Dual redundant 800W high-efficiency (80+ Platinum)
Cooling 4x heavy-duty counter-rotating fans
Dimensions 437 x 43 x 597 mm (W x H x D)
Weight Approximately 16 kg (35 lbs) barebones
Operating Temperature 10°C to 35°C (50°F to 95°F)
Security Features TPM 2.0 support, chassis intrusion detection
Maintenance Tool-less access to hot-swappable components
Spare Parts Available from Supermicro authorized distributors
Certifications CE, FCC, UL, RoHS

Frequently Asked Questions - SuperServer 1029TP-DC0R Supermicro

How to configure RAID on the SuperServer 1029TP-DC0R?
The server supports optional RAID controllers. Enter the BIOS setup during boot, navigate to the Storage menu, and configure the RAID level according to your needs. If a hardware RAID controller is installed, use its utility (e.g., MegaRAID) to create virtual drives.
Which processors are compatible with this server?
The SuperServer 1029TP-DC0R supports dual Intel Xeon Scalable processors (Skylake or Cascade Lake). Always check the CPU compatibility list from Supermicro for specific SKUs and BIOS requirements.
How many memory modules can I install?
The motherboard features 24 DIMM slots supporting DDR4 ECC memory. You can install up to 1.5TB using 64GB modules, but verify the memory population rules in the manual for optimal performance.
How to update BIOS or IPMI firmware?
Download the latest BIOS and IPMI firmware from the Supermicro website. Use the SUMC (Supermicro Update Manager) or the Web UI for IPMI. Ensure a stable power supply and do not interrupt the process.
How to access remote management?
The server has a dedicated IPMI 2.0 LAN port. Connect it to your network, find the IP address via DHCP or the default IP, and open a web browser to access the BMC web interface. You can manage power, sensors, and remote console.
What drive sizes are supported?
The chassis supports 2.5-inch hot-swap drives. Depending on the configuration, it can accommodate SATA, SAS, or NVMe drives. Check the drive bay labels and the manual for supported interface types.
How to reset the BMC password?
To reset the BMC password, power off the server, open the chassis, and locate the JPB Jumper on the motherboard. Move the jumper to the reset position for a few seconds, then restore it. Alternatively, clear CMOS or use the IPMI command utility.
How to replace a failed power supply?
The server has dual redundant power supplies. To replace a faulty unit, disconnect the power cord, press the release tab, and slide the unit out. Install the new module by sliding it in until it clicks. The server can operate on the remaining PSU during replacement.
How to clean the server regularly?
Power off the server, disconnect all cables, and open the chassis. Use compressed air to remove dust from fans, heatsinks, and components. Clean the air filters if present. Avoid using liquids. Reassemble and power on after verifying connections.
How to check system health?
Use the IPMI web interface or Supermicro Server Manager to monitor voltages, temperatures, and fan speeds. The BMC logs events and can send alerts via SNMP or Email. Review these logs regularly for proactive maintenance.

User questions about SuperServer 1029TP-DC0R Supermicro

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Server in PDF format for free! Find your manual SuperServer 1029TP-DC0R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 1029TP-DC0R by Supermicro.

USER MANUAL SuperServer 1029TP-DC0R Supermicro

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Supermicro

Model : SuperServer 1029TP-DC0R

Category : Server