SuperServer F618H6-FTL+ - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer F618H6-FTL+ Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mounted server |
| Brand | Supermicro |
| Model | SuperServer F618H6-FTL+ |
| Form Factor | 4U rack chassis |
| Dimensions (W x D x H) | 437 mm x 705 mm x 176 mm |
| Weight | Approximately 28 kg (with drives) |
| Power Supply | Dual redundant 2000 W Platinum power supplies |
| Supported Processors | Dual Intel Xeon Scalable processors (Socket P+) |
| Memory | 16 DIMM slots, up to 4 TB ECC DDR4 |
| Storage Bays | 12 x 3.5-inch hot-swap SATA/SAS drive bays |
| Expansion Slots | 3 x PCIe 4.0 x16 slots, 1 x PCIe 4.0 x8 slot |
| Networking | Dual 10GbE LAN ports, dedicated IPMI LAN |
| Management | Integrated IPMI 2.0 with KVM over IP |
| Cooling | 5 heavy-duty hot-swap fans with failover support |
| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
| Compliance | CE, FCC, RoHS certified |
| Maintenance & Cleaning | Use compressed air for dust; avoid liquids; power off before servicing |
| Safety Features | Mechanical lock on front bezel, intrusion detection, surge protection |
| Spare Parts & Repairability | Field-replaceable PSU, fans, and drive trays; limited warranty |
Frequently Asked Questions - SuperServer F618H6-FTL+ Supermicro
What type of server is the Supermicro SuperServer F618H6-FTL+?
The Supermicro SuperServer F618H6-FTL+ is a rack-mounted server designed for enterprise workloads, offering high-density storage and dual processor support.
How do I access the BIOS/UEFI setup during POST?
Press DEL key repeatedly when the system powers on. To access the IPMI management console, press CTRL+I or use the dedicated IPMI LAN port.
What is the maximum memory capacity?
The server supports up to 4 TB of ECC DDR4 memory across 16 DIMM slots, enabling large virtualization and database workloads.
Can I add additional GPUs or expansion cards?
Yes, the system provides PCIe 4.0 x16 and x8 slots for adding GPUs, RAID controllers, or high-speed network adapters.
How do I replace a failed power supply unit?
The power supplies are hot-swappable. Remove the retention screw, pull the failed PSU out by its handle, and slide in a new unit until it clicks.
What kind of hard drives are supported?
The server supports 3.5-inch SATA/SAS hot-swap drives. Using a RAID controller, you can configure RAID 0, 1, 5, 6, or 10 for data protection.
How often should I clean the server internals?
Clean the chassis and fans every 3 to 6 months using low-pressure compressed air. Always power off the server and unplug it before cleaning.
Can I monitor the server remotely?
Yes, the integrated IPMI 2.0 provides remote KVM over IP, sensor monitoring, and power control via a web interface or command line.
What should I do if the server overheats?
Check the LCD/indicator and IPMI logs for fan failures, clean the air filters, ensure ambient temperature is below 35°C, and verify all fans are spinning.
Are spare parts available for this server?
Yes, Supermicro provides genuine spare parts including PSU, fans, drive trays, and riser cards. Consult your authorized reseller for availability.
User questions about SuperServer F618H6-FTL+ Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer F618H6-FTL+ - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer F618H6-FTL+ by Supermicro.
USER MANUAL SuperServer F618H6-FTL+ Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer F618H6-FTL+
Category : Server