SuperServer F618R2-RC1PT+ - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer F618R2-RC1PT+ Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Model Number | SuperServer F618R2-RC1PT+ |
| Form Factor | 4U Rackmount |
| Processor Support | Dual Intel Xeon Scalable processors |
| Memory Support | 24 DDR4 DIMM slots; up to 3 TB ECC LRDIMM |
| Storage | Up to 24 hot-swap 2.5-inch SATA/SAS/NVMe drive bays |
| RAID Support | On-board SATA controller; optional hardware RAID |
| Networking | Dual 10GbE LAN ports (Intel X540) |
| Expansion Slots | 6 PCIe 3.0 x16 slots (full-height) |
| Power Supply | Redundant 1600W Platinum (100-240V AC) hot-swap |
| Cooling System | 4 counter-rotating hot-swap fans |
| Management | IPMI 2.0 with iKVM, dedicated LAN port |
| Dimensions (H x W x D) | 7.0 x 17.2 x 28.5 inches (178 x 437 x 724 mm) |
| Weight | Approximately 50 lbs (22.7 kg) fully loaded |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Safety Certifications | UL, CE, FCC, RoHS |
| Maintenance | Tool-free access to internals; modular FRUs |
| Cleaning | Use compressed air; avoid liquid cleaners |
| Repairability | Field-replaceable units for PSU, fans, drives |
| General Information | Designed for high-density data center workloads |
Frequently Asked Questions - SuperServer F618R2-RC1PT+ Supermicro
How can I download the user manual for my Supermicro SuperServer F618R2-RC1PT+?
Visit the official Supermicro support page and enter your server model. You can also use the Notice-Facile platform to download the free PDF manual from the download section.
What is the default IPMI IP address for remote management?
The factory default IPMI LAN IP is 192.168.0.120. You can access it via a web browser to configure remote monitoring and control.
How do I reset the administrator password?
Set the Jumper JBT1 on the motherboard to clear CMOS and reset the password. Alternatively, use the IPMI Reset command via the CLI or contact Supermicro support.
Can I use both Intel Xeon and AMD EPYC processors in this server?
No, the SuperServer F618R2-RC1PT+ is designed specifically for Intel Xeon Scalable processors. It uses an Intel chipset and CPU socket, so only compatible Intel processors are supported.
How to configure a RAID array?
Enter the BIOS setup during boot (Del key) and navigate to the Storage configuration. If an add-on RAID card is installed, use its Option-ROM utility (e.g., Ctrl+H for LSI/Avago). Prefer the onboard SATA controller if no hardware RAID is needed.
What type of memory is supported?
This server supports DDR4 ECC RDIMM and LRDIMM modules, with speeds up to 2933MHz. For maximum capacity, use 128GB 3DS LRDIMM in all 24 slots.
How to replace a failed power supply?
The power supplies are hot-swap. Identify the faulty PSU by its red/green LED. Unlock and remove it by pressing the release latch, then slide a new one in until it clicks. The system will automatically resume full power redundancy.
Is the server hot-swappable for fans and drives?
Yes, the fans and drive bays are hot-swappable. They can be replaced without powering down the server. For drives, ensure the storage controller supports RAID hot-swap.
How to update the BIOS?
Download the latest BIOS firmware from the Supermicro website, unzip the file, and run the FlashUpdate utility under DOS or use the SUMI++ tool. Alternatively, you can update via IPMI by uploading the ROM.
Where can I find spare parts?
Spare parts such as power supplies, fans, and drive carriers are available from Supermicro's authorized dealers. Visit the official SuperMicro spare parts page and search by your model number. Many third-party vendors also sell compatible components.
User questions about SuperServer F618R2-RC1PT+ Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer F618R2-RC1PT+ - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer F618R2-RC1PT+ by Supermicro.
USER MANUAL SuperServer F618R2-RC1PT+ Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer F618R2-RC1PT+
Category : Server