SuperServer SYS-F620P3-RTBN - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SYS-F620P3-RTBN Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Brand | Supermicro |
| Model | SuperServer SYS-F620P3-RTBN |
| Form Factor | 2U Rackmount |
| Processor Support | Dual Intel Xeon Scalable (3rd Gen) processors |
| Memory | 32 DIMM slots, up to 6TB DDR4 ECC memory |
| Storage | 24x 2.5" hot-swap drive bays |
| Expansion Slots | PCIe 4.0 x16 and x8 slots |
| Networking | Dual 10GbE onboard LAN ports |
| Power Supply | Redundant (1+1) Platinum power supplies, 1600W each |
| Dimensions | Width: 17.2" (437mm), Height: 3.5" (89mm), Depth: 27.8" (706mm) |
| Weight | Approximately 35 lbs (16 kg) |
| Cooling | Redundant hot-swappable cooling fans |
| Management | IPMI 2.0 with dedicated LAN port, supports Supermicro Server Manager |
| Security | TPM 2.0 header, secure boot, chassis intrusion detection |
| Repairability | Tool-less chassis with modular components for easy serviceability |
| Maintenance | Hot-swap fans and drives, redundant power supplies for minimal downtime |
| General Information | Designed for data center workloads, virtualization, and high-performance computing |
Frequently Asked Questions - SuperServer SYS-F620P3-RTBN Supermicro
What kind of processor is compatible with the SuperServer SYS-F620P3-RTBN?
The SuperServer SYS-F620P3-RTBN supports dual Intel Xeon Scalable (3rd Gen) processors, offering high performance for demanding workloads.
How much memory can be installed on this server?
The server features 32 DIMM slots supporting up to 6TB of DDR4 ECC memory, allowing massive memory capacity.
What storage options are available?
It includes 24 hot-swap 2.5-inch drive bays for SAS/SATA drives. Optional NVMe configurations are supported for ultra-fast storage.
How do I access the remote management interface?
The server has a dedicated IPMI LAN port. Connect to the IPMI address via your browser to access the Supermicro BMC for remote monitoring and control.
Can I replace the power supply without shutting down the server?
Yes, the server is equipped with redundant (1+1) hot-swap power supplies, so a failed unit can be swapped without interrupting operations.
How do I update the BIOS?
Download the latest BIOS from the Supermicro support website. Use the SUMC tool or the BIOS flash utility within the BMC to update safely.
How do I configure RAID?
You can configure RAID through the onboard SATA controller or an optional LSI RAID card. Enter the RAID configuration utility during boot to set up your array.
What are the dimensions and weight of the server?
It is a 2U rackmount server measuring 17.2 inches x 3.5 inches x 27.8 inches (W x H x D) and weighing approximately 35 lbs (16 kg), ideal for standard server racks.
How do I maintain the cooling system?
The server uses redundant hot-swappable fans. Check the BMC airflow sensors regularly and clean or replace fans as needed to ensure proper cooling.
Is TPM 2.0 supported for security?
Yes, the motherboard includes a TPM 2.0 header and supports secure boot, helping to protect against firmware attacks.
User questions about SuperServer SYS-F620P3-RTBN Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-F620P3-RTBN - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-F620P3-RTBN by Supermicro.
USER MANUAL SuperServer SYS-F620P3-RTBN Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer SYS-F620P3-RTBN
Category : Server