JPD2400M20DX - Switch HAGER - Free user manual and instructions
Find the device manual for free JPD2400M20DX HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Electrical switch (interrupteur) |
| Brand | Hager |
| Model | JPD2400M20DX |
| Application | Indoor lighting and appliance control |
| Mounting type | Flush-mounted |
| Rated voltage | 220-240 V AC |
| Rated frequency | 50/60 Hz |
| Rated current | 10 A |
| Number of poles | 1-pole |
| Housing material | Polycarbonate, self-extinguishing |
| Degree of protection | IP20 |
| Contact type | Silver alloy contacts |
| Control mechanism | Rocker / toggle action |
| Dimensions (W x H x D) | 80 x 80 x 40 mm |
| Weight | 0.1 kg |
| Operating temperature | -5°C to +40°C |
| Maintenance | Wipe with a soft dry cloth |
| Safety certification | CE, EN 60669 |
| Spare parts availability | Available through Hager service network |
| Repairability | Repairable by a qualified technician |
Frequently Asked Questions - JPD2400M20DX HAGER
Is this switch suitable for residential lighting?
Yes, the Hager JPD2400M20DX is designed for indoor lighting circuits and standard appliance control in residential settings. It supports 220-240 V AC and a rated current of 10 A.
What is the maximum load I can connect?
With a rated current of 10 A, the maximum resistive load at 230 V is approximately 2300 W. For inductive loads such as motors or fluorescent lighting, derate the load by 20%.
Can it be used with LED lights?
Yes, it works with LED lights, but ensure the total inrush current of the LED drivers does not exceed the switch's rated current. Use a switch with a higher rating if connecting many LED fixtures.
How do I install it?
Turn off the main power at the circuit breaker before installation. Connect the phase wire to one terminal and the switched wire to the other. The switch is single-pole and does not require a neutral wire.
Does it require a neutral wire?
No, this switch is a standard single-pole switch and only requires a live (phase) wire and a load wire. It does not need a neutral connection.
What are the dimensions of the switch?
The approximate dimensions are 80 mm x 80 mm x 40 mm (width x height x depth), making it compatible with standard flush-mounted wall boxes in Europe.
Is it compatible with standard European wall boxes?
Yes, the switch is designed to fit common flush-mounted junction boxes used in Europe, with a 60 mm diameter and 50 mm depth.
How should I clean it?
Use a soft, dry cloth to wipe the surface. Do not use water, abrasive cleaners, or solvent-based products, as they may damage the polycarbonate housing.
What safety standards does it meet?
It complies with the European standards EN 60669 for switches and carries the CE mark, ensuring safety in electrical installations.
Where can I find spare parts?
Spare parts such as rocker buttons or terminals can be ordered through the Hager service network or authorized distributors. Check the online portal for specific part numbers.
User questions about JPD2400M20DX HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual JPD2400M20DX - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JPD2400M20DX by HAGER.
USER MANUAL JPD2400M20DX HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : JPD2400M20DX
Category : Switch