CRA690 - Switch HAGER - Free user manual and instructions
Find the device manual for free CRA690 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Switch |
| Brand | Hager |
| Model | CRA690 |
| Colour | White |
| Material | High-strength thermoplastic |
| Mounting Type | Flush-mounted |
| Number of Gangs | 1 (single pole) |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Switching Function | Single-pole, single-throw (SPST) |
| Protection Rating | IP20 (indoor use) |
| Dimensions (H x W x D) | 80 x 80 x 30 mm |
| Weight | 120 g |
| Operating Temperature | -5°C to +40°C |
| Marking | CE, NF, EN 60669-1 |
| Terminals | Screw terminals for 1.0-2.5 mm² cables |
| Installation Depth | Minimum wall box depth 40 mm |
| Mechanical Durability | 20,000 cycles |
| Warranty | 2 years |
| Included Accessories | Installation manual (PDF) |
Frequently Asked Questions - CRA690 HAGER
What is the maximum load for the Hager CRA690 switch?
The Hager CRA690 is rated at 250 V AC and 10 A, making it suitable for most residential lighting circuits. Always verify the total wattage of your lights does not exceed this rating to prevent overheating.
Can I install the CRA690 myself?
Installation should be done by a qualified electrician to ensure compliance with local electrical codes. If you have experience, always switch off the power at the circuit breaker before wiring.
Is the CRA690 compatible with LED bulbs?
Yes, it works with LED bulbs as long as the total load is below 10 A. For extremely low LED loads, consider using a model with a neon indicator to avoid flickering.
Does the CRA690 support three-way switching?
No, this is a single-pole switch. For three-way or multi-way switching, you need a different model or an add-on switch such as Hager's two-way range.
What are the dimensions of the CRA690?
The switch measures approximately 80 x 80 x 30 mm (H x W x D), which fits standard flush-mounted wall boxes with a minimum depth of 40 mm.
Can I use the CRA690 in a bathroom or outdoors?
The CRA690 has an IP20 rating, meaning it is not dust-tight or water-resistant. It should only be installed indoors in dry locations. For bathrooms, use a switch with IP44 or higher.
How do I clean the CRA690?
Wipe the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the plastic and electrical contacts.
What is the expected lifespan of the switch?
The mechanical durability is rated at 20,000 cycles, ensuring years of reliable operation under normal use. Wear and tear depends on usage frequency.
How many wires can I connect to the CRA690 terminals?
The screw terminals accept solid or stranded copper wires from 1.0 to 2.5 mm². You can connect up to two wires per terminal if needed, but ensure they are tightly secured.
Is there a warranty for the CRA690?
Hager typically offers a 2-year warranty against manufacturing defects. Keep your receipt and contact your local dealer or Hager customer service for support.
User questions about CRA690 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual CRA690 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRA690 by HAGER.
USER MANUAL CRA690 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : CRA690
Category : Switch