JPA4800M20TW - Switch HAGER - Free user manual and instructions
Find the device manual for free JPA4800M20TW HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Light Switch |
| Brand | Hager |
| Model | JPA4800M20TW |
| Category | Switch |
| Installation Type | Flush mounted |
| Switching Configuration | Two-way (SPDT) |
| Number of Gangs | 1 |
| Number of Ways | 2-way |
| Rated Voltage | 250 V AC |
| Rated Current | 20 A |
| Frequency | 50/60 Hz |
| Terminal Capacity | 2.5 to 6 mm² |
| Material | Fire-resistant thermoplastic |
| Color | White |
| Width | 80 mm |
| Height | 80 mm |
| Depth | 41 mm |
| Protection Rating | IP20 |
| Ambient Temperature | -10°C to +40°C |
| Mechanical Endurance | 20,000 cycles |
| Standards | CE / NF / VDE |
| Maintenance | Wipe with dry cloth |
| Safety | Double insulated |
| Spare Parts | Rocker, frame, mechanism |
Frequently Asked Questions - JPA4800M20TW HAGER
What is the Hager JPA4800M20TW switch used for?
The Hager JPA4800M20TW is a flush-mounted light switch designed to control lighting circuits in residential and commercial buildings. It provides reliable on/off switching and can be used in two-way setups.
Can this switch be used for both one-way and two-way switching?
Yes, the JPA4800M20TW supports two-way switching. It can be wired as a one-way switch, or with another switch for two-way control from multiple locations.
What is the maximum load for this switch?
The switch is rated for 20A at 250V AC, which means it can handle up to 5000W. Always verify the connected load does not exceed this rating.
How do I install the Hager JPA4800M20TW switch?
Installation should be done by a qualified electrician. Ensure the power is off, connect the phase wire to the common terminal and the switch wires to the other terminals, then mount the switch in a flush-mounted box.
Is this switch suitable for outdoor use?
No, the IP20 rating means it is not protected against water or humidity. Use it only indoors in dry locations.
What is the recommended wire gauge for connection?
The screw terminals accept conductors from 2.5 mm² to 6 mm². Use properly sized solid or stranded copper wires.
How do I clean and maintain this switch?
Wipe the surface with a soft dry cloth. Do not use abrasive cleaners, solvents, or water, as they may damage the switch.
Does this switch come with a warranty?
Hager provides a standard 2-year warranty on electrical devices. Check your local regulations and keep the purchase receipt.
Can I replace the rocker on this switch?
Yes, the rocker (toggle) and front frame are available as spare parts. They can be removed and replaced without separating the mechanism from the wall.
What safety certifications does this switch have?
The switch is compliant with CE, NF, and VDE standards, ensuring it meets European electrical safety requirements.
User questions about JPA4800M20TW HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual JPA4800M20TW - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JPA4800M20TW by HAGER.
USER MANUAL JPA4800M20TW HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : JPA4800M20TW
Category : Switch